LEMON Manuals: Even more car manuals for everyone
Home >> Sterling >> 1988 >> 825 S, 2.5 C >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Hub Carrier >> Removal

Hub Carrier: Removal

  1. Disconnect negative battery cable. Remove wheel assembly. Disconnect stabilizer bar link at lower arm. Remove brake caliper and move away from hub carrier.
  2. Remove rotor-to-hub flange bolts. Remove rotor from hub flange. Support lower arm with a jack. Ensure jack is properly positioned. Remove trailing arm-to-hub carrier bolt. Remove lower arm-to-hub carrier bolt. See Figure .
    WARNING: Ensure jack is properly positioned under lower arm to prevent personal injury. Coil spring tension is applied to lower control arm.
  3. Remove hub carrier-to-shock absorber bolt. Separate shock absorber from hub carrier. Remove hub carrier.
scientia non olet · About LEMON Manuals