Electrical Function Schematic For Camshaft Adjustment - PE07.10-P-2716-97BBA
ENGINE 281.910 in MODEL 453.0/3/4
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Engine load, signal | 10G |
| 2 | Camshaft Hall sensor, signal | 8H |
| 3 | Coolant temperature sensor, signal | 6G |
| 4 | Variable camshaft adjustment valve, actuation | 3F |
| 5 | Engine oil pump valve, actuation | 4D |
| 6 | Engine speed, signal | 8D |
| 7 | Circuit 87, status | 9D |
| 8 | Engine running, signal | 13F |
| B11/4 | Coolant temperature sensor | 3J |
| B28/7 | Pressure sensor downstream of throttle valve | 12H |
| B6/15 | Intake camshaft Hall sensor | 8K |
| CAN B | Interior CAN | 11F |
| F11k1 | Engine function circuit 87 relay | 10B |
| L5 | Crankshaft position sensor | 9B |
| N10/11 | Driver SAM control unit | 14E |
| N3/10 | ME-SFI [ME] control unit | 8E |
| Y130 | Engine oil pump valve | 3C |
| Y49/10 | Variable camshaft adjustment valve | 1E |