LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2019 >> Fortwo 2D Coupe >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Electrical System - Body - 453 Chassis - 1 Of 2 >> Basic Knowledge >> Speaker Output Function - GF82.62-P-4212KJ

Speaker Output Function - GF82.62-P-4212KJ

MODEL 453.0/3/4 

Function requirements for speaker output, general 

Speaker output, general 

A distinction is made between the following procedures:

Speaker output in vehicles with code 810 (Sound system) 

The audio signals are routed in an analog manner via twisted lines to the sound system amplifier control unit (N40/3) where they undergo final amplification and are output via the following speakers using direct lines:

Speaker output in vehicles except code 810 (Sound system) and with code 535 (smart media system) 

The audio signals are output via the following speakers by the audio equipment using direct lines:

IMPORTANT On vehicles as of model year 2018, the front tweeters are built into the left front door speaker and right front door speaker.

Speaker output in vehicles except code 810 (Sound system) and code 537 (smart Audio-System) 

The audio signals are output via the following speakers by the audio equipment using direct lines:

Speaker actuation in the event of voice output 

The following speakers are actuated for voice output (e.g. as part of telephony, navigation or the voice control system (VCS)):

  Electrical function schematic for speaker system   PE82.62-P-2300-97BBA
  Overview of system components, telematics   GF82.85-P-9999KJ