Remove/Install Left Rear Brake Line - AR42.10-P-0036SR
MODEL 453
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of poisoning
from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid |
Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | AS42.50-Z-0001-01A | |
| Brake fluid notes | AH42.50-P-0001-01A | ||
| Notes on repairs to brake system | AH42.00-P-0003-01A | ||
| Remove/install | |||
| 1 | Install brake pedal jack with adapter between brake pedal and driver seat, and depress brake pedal by approx. 2 cm | Cover driver seat. Otherwise the driver seat could be soiled or damaged. |
|
| Figure | |||
| Figure | |||
| 2 | Raise vehicle with vehicle lift | ||
| 3 | Disconnect left rear brake line (1) from left rear brake hose (2) and seal off connections | *BA42.10-P-1002-04SR | |
| Figure | |||
| 4 | Unscrew left rear brake line (1) from wheel brake cylinder (3) and seal off connections | *BA42.10-P-1006-04SR | |
| Figure | |||
| 5 | Unclip left rear brake line (1) | ||
| 6 | Remove left rear brake line (1) | Do not kink or bend the left rear brake line (1). Leaks can occur otherwise. |
|
| 7 | Install in the reverse order | ||
| 8 | Bleed brake system | AR42.10-P-0010SR |
BRAKE LINES, BRAKE HOSES
| Number | Designation | MODEL 453 | |
|---|---|---|---|
| BA42.10-P-1002-04SR | Retaining screw, brake line to brake hose | Nm | 13 |
BRAKE LINES, BRAKE HOSES
| Number | Designation | MODEL 453 |
|---|---|---|
| BA42.10-P-1006-04SR | Retaining screw, brake line to rear wheel brake cylinder | 15 |