Remove/Install Brake Carrier - AR42.10-P-0500SR
MODEL 453
Shown on MODEL 453.3
| Remove/install | |||
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| Notes on repairs to brake system | AH42.00-P-0003-01A | ||
| 1 | Remove brake caliper (1) and hang up to one side with attached brake hose | Brake hose must not be under tension. Otherwise, the brake hose can be damaged. |
AR42.10-P-0070SR |
| 2 | Unscrew screws/bolts (3) and remove brake caliper support (2) | *BA42.10-P-1002-10SR | |
| 3 | Install in the reverse order |
FRONT AXLE BRAKE CALIPER
| Number | Designation | MODEL 453 | |
|---|---|---|---|
| BA42.10-P-1002-10SR | Screw/bolt, brake caliper support to steering knuckle | Nm | 105 |