Wiring Diagram For Vacuum Pump Control Unit - PE43.05-P-2000-97BEA
MODEL 453.091/391/491 up to model year 2020
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 40L |
| A9/6 | Electric refrigerant compressor | 30L |
| B150/1 | Brake booster vacuum sensor | 9L |
| Code 908 | On-board charger 22kW | 15G |
| Code I01 | Air conditioning | 23D |
| F1 | Power supply fuse and relay module | 3L |
| F1f2 | Fuse 2 | 1K |
| F2 | Vehicle interior fuse and relay module | 13L |
| F2f48 | Fuse 48 | 11K |
| M56 | Vacuum pump | 6L |
| N127 | Electric drive control unit | 26L |
| N129/1 | Power electronics control unit | 17L |
| N33/5 | High-voltage PTC heater | 22L |
| N65/3 | Brake booster vacuum pump control unit | 4A |
| N65/3 | Brake booster vacuum pump control unit | 12A |
| N65/3 | Brake booster vacuum pump control unit | 20A |
| N83 | High-voltage control unit box | 18L |
| U427 | Valid for charger (7 kW) | 15G |
| W11 | Combustion engine ground point | 3H |
| X26 | Vehicle interior/engine wiring harness electrical connector | 1H |
| X26 | Vehicle interior/engine wiring harness electrical connector | 7H |
| X26 | Vehicle interior/engine wiring harness electrical connector | 22H |
| Z6/171 | Ground connection connector sleeve | 3E |
| Z99/16 | Connector sleeve/LIN bus | 26E |