Attaching/Removing Engine Support Fixture - AR01.10-P-2400-06SR

ENGINE 281 

000 588 03 62 00 Lifting platform

WS01.00-P-0091A

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

Shown on engine 281.920 with transmission 700.12 

Installing 

1. Position main assembly lifting table with universal main assembly mount (1) under engine and transmission.
2. Position mounting plate (2) of adaptation between the front edge of the oil pan (arrow) and drain screw.

   Do not load oil pan in the center and not in the area of the drain screw.

   Deformation of the oil pan will occur otherwise.

3. Position mounts (3) for adaptation under the transmission.
4. Adjust height of the mounting plate (2) and the mounts (3) of adaptation appropriately.

   Remove 

5. Lower main assembly lifting table with universal main assembly mount (1) and pull to the front under the vehicle.
6. Remove mounting plate (2) and mounts (3) of adaptation from the main assembly lifting table with universal main assembly mount (1).