Risk Of Injury Caused By Caustic Burns Due To Contact With Metal Dust Remover - As98.00-Z-0003-01A

Avoid contact. Wear tight-fitting safety glasses and acid-resistant gloves.

Model all (4xWD, CAR, Heavy transporter, Light transporter, UNIMOG, smart) 

Risk of injury 

The metal dust remover contains oxalic and phosphoric acids. Contact or swallowing can result in caustic burns.

Safety instructions/precautions 

• Wear acid-resistant protective clothing (apron, protective gloves) as well as safety glasses. Observe safety regulations!
• Wear tight-fitting safety glasses, acid-resistant gloves and protective clothing.
• Avoid all contact with eyes and skin.
• Do not eat or drink while performing this work.
• Keep metal dust remover away from food and beverages.
• Work only in well ventilated rooms.

First aid measures 

In the event of ingestion

• Consult physician immediately. Do not allow the person to induce vomiting if not fully conscious. Rinse out mouth and drink large quantities of water.

  In the event of contact with eyes

• Rinse thoroughly with water and consult an eye specialist immediately.

  In the event of inhalation

• Move the person into the fresh air and consult a physician.

  In the event of skin contact

• Immediately wash with plenty of soap and water, apply protective skin ointment. Consult a physician if skin irritation continues.