Remove/Install Door Paneling - AR72.18-P-1000SRA
MODEL 453.3/4
Shown on left side of vehicle on Model 453.3
| Remove/install | |||
| 1 | Remove outside mirror | AR88.70-P-9000SRA | |
| 2 | Remove outside door handle on front door | AR72.10-P-4015SRA | |
| 3 | Remove front fender | AR88.10-P-1000SRA | |
| 4 | Remove bracket on front fender from body | ||
| 5 | Remove window channel strip (4) | ||
| 6 | Unscrew bolt (2) from door paneling (1) and remove with sleeve (3) | ||
| 7 | Open door from inside, carefully slide door paneling (1) toward rear and lift over door panel lining in rear area (arrow A) | Treat door paneling (1) carefully. Otherwise damage can be caused by breakage and scratches. Do not damage seal (7) on window (6). Otherwise the seal (7) must be replaced. |
|
| 8 | Carefully slide door paneling (1) toward front until brackets (8) are exposed in their guide in the door body shell | ||
| 9 | Slightly lift door paneling (1) in front and rear area of installation location of window channel strip (4) and pull toward outside until catches (9) disengage | ||
| 10 | Carefully slide door paneling (1) toward front and remove downward | ||
| 11 | Install in the reverse order |