Cut Out Glass Pane On Panoramic Roof - AR77.21-P-0750-01SRA
MODEL 453.3
with CODE E22 (Panoramic sunroof)
| Risk of injury from cutting wire tearing or becoming hot and from splinters of glass when cutting out bonded windows | Wear protective gloves and safety glasses. | AS67.00-Z-0004-01A |
- Mask paint surfaces on roof paneling adjacent to glass pane on panoramic roof (1) with suitable adhesive tape.
To protect adjacent paint surfaces against damage.
- Install two cup suction tools on panoramic roof glass pane (1).
- Cut cutting wire to a length of approx. 50 cm.
- Punch cutting wire at front left and right corner (arrow).
- Fasten counterholder at end of cutting wire in vehicle interior.
- Cut out glass pane on panoramic roof (1) with cutting wire and remove from panoramic roof frame.