Remove/Install Interior Paneling On Roll Bar - AR68.30-P-1380SRC

MODEL 453.4 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Completely open soft top
2	Disconnect front and rear section on paneling (1) and remove	: Check catches on front and rear section of paneling (1) for damage. Clip remover In the event of complaints Replace front and rear section of paneling (1)	Figure
3	Install in the reverse order

Fig 1: Identifying Clip Remover (452 589 01 63 00)

Courtesy of MERCEDES-BENZ USA