Remove And Install Wiper Arm - AR82.30-P-6100SR
MODEL 453
| Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. | When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). | AS82.30-Z-0001-01A | |
| Remove/install | |||
| 1 | Move windshield wiper system to park position | ||
| 2 | Open maintenance flap | ||
| 3 | Remove covers (3) | ||
| 4 | Unscrew nuts (4) | Model 453.3 Nut, wiper arm to wiper system |
*BA82.30-P-1001-01SR |
| 5 | Loosen wiper arm (1 or 2) from windshield wiper system using puller and remove | Fig 1 | |
| 6 | Install in the reverse order |
WINDSHIELD WIPER
| Number | Designation | Model 453.0 | Model 453.3 | |
|---|---|---|---|---|
| BA82.30-P-1001-01SR | Nut, wiper arm to wiper system | Nm | 12 | 12 |