Risk Of Injury Caused By Slipping When Inserting Blade In The Multicutter And Byglass Splinters When Cutting Out Bonded Windows - AS67.00-Z-0001-01A

MODEL ALL (4xWD, BUS, CAR, Heavy transporter, Light transporter, TRUCK, UNIMOG, smart) 

Always interrupt air supply or power supply before inserting or removing blade. Wear protective gloves and safety glasses

Risk of injury 

When inserting or removing the blade for the multicutter, body parts may be cut if the tightening wrench slips or if the multicutter is switched on unintentionally.

Injuries to eyes and hands may be caused by flying glass splinters when cutting out bonded windows.

Safety instructions/precautions 

• Wear protective gloves.
• Wear safety glasses when cutting out window glass.

Pneumatic multicutter:

• Always interrupt air supply when inserting or removing multicutter blade.

Electric multicutter:

• Only clamp in or remove the knife for the multicutter with the power supply plug disconnected.