Align Windshield In Body Opening - AR67.10-P-1000-09SR
MODEL 453
TEST AND ADJUSTMENT VALUES FOR GAP DIMENSIONS
| Number | Designation | Model 453.0 | ||
|---|---|---|---|---|
| BE60.00-P-1010-01CA | Windshield to A-pillar | Dimension "H2" | mm | 3 (±1, 5) |
TEST AND ADJUSTMENT VALUES FOR GAP DIMENSIONS
| Number | Designation | Model 453.0 | ||
|---|---|---|---|---|
| BE60.00-P-1011-01CA | Windshield to roof paneling | Dimension "H3" | mm | 3 (±1, 5) |
- Affix cup suction tools on windshield (1).
- Mount windshield (1) with a helper on rubber spacers on body flange.
- 3.1 Model 453.0
Align windshield (1) in body opening using
feeler gauge.
- 3.2 Model 453.3/4
Center windshield (1) in body opening using
- Affix tape strips (arrows).
- Cut tape strips (arrows).
Do not remove strips of adhesive tape (arrows).
- Remove windshield (1) with a helper from vehicle.
Shown on model 453.3