Electrical Function Schematic For Charging - PE09.00-P-2050-97BBA
ENGINE 281.910 in MODEL 453.0/3/4
| Code: | Designation: | Position: |
|---|---|---|
| 1 | Boost pressure, signal | 8G |
| 10 | Intake air temperature sensor, signal | 6F |
| 11 | Throttle valve actuator motor, actuation | 4E |
| 12 | Bypass air switchover valve, actuation | 11G |
| 13 | Coolant pump, actuation | 13B |
| 2 | Intake manifold pressure, signal | 9G |
| 3 | Accelerator pedal sensor, signal | 7G |
| 4 | Engine speed, signal | 6D |
| 5 | Boost pressure control flap actuator, actuation | 7C |
| 6 | Charge air temperature sensor, signal | 9D |
| 7 | Circuit 87, status | 8D |
| 8 | Engine running, signal | 13E |
| 9 | Throttle valve actuator, signal | 6F |
| B17 | Intake air temperature sensor | 5G |
| B17/8 | Charge air temperature sensor | 10B |
| B28/6 | Pressure sensor upstream of throttle valve | 8J |
| B28/7 | Pressure sensor downstream of throttle valve | 10H |
| B37 | Accelerator pedal sensor | 5J |
| CAN B | Interior CAN | 11F |
| F11k1 | Engine function circuit 87 relay | 8A |
| L5 | Crankshaft position sensor | 5C |
| M16/6m1 | Actuator motor | 3E |
| M16/6r1 | Actual value potentiometer 1 | 3F |
| M16/6r2 | Actual value potentiometer 2 | 3F |
| M16/7 | Boost pressure control flap actuator | 6A |
| M44 | Charge air cooler circulation pump | 13D |
| M44 | Charge air cooler circulation pump | 13B |
| N10/10 | Center SAM control unit | 14E |
| N3/10 | ME-SFI [ME] control unit | 8D |
| U1204 | Valid for gasoline engine 281, 80 kW with equipment "BRABUS tailor made" | 13C |
| U19 | Valid for standard equipment | 13A |
| Y101 | Divert air switchover valve | 12G |