Remove/Install Boost Pressure Sensor Downstream Of Throttle Valve - AR09.41-P-0004SR
ENGINE 281.910 in MODEL 453
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove covering over engine | ||
| 2 | Disconnect electrical connection (1) | ||
| 3 | Remove screw/bolt (2) | ||
| 4 | Pull pressure sensor downstream of throttle valve (B28/7) out of charge air distributor (3) | ||
| 5 | Install in the reverse order | ||
| 6 | Connect diagnostic unit, read out fault memory | When replacing the pressure sensor downstream of throttle valve (B28/7). | |
| AD00.00-P-2000-06SR |