Brake system - inspect fluid level - AP42.10-P-4210RQ

MODEL 197.3/4 

Fig 1: Identifying Expansion Reservoir

Courtesy of MERCEDES-BENZ USA

	Risk of poisoning  from swallowing brake fluid. Risk of injury  from skin and eye contact with brake fluid	Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
	Brake fluid notes		AH42.50-P-0001-01A
	Notes on repairs to brake system		AH42.00-P-0003-01A
	Preparatory activity
1	Remove covering on brake unit	MODEL 197.3/4 with CODE B14 (Carbon-fiber engine compartment cover)
	Check
2	Check fluid level in expansion reservoir (1)
	General brake fluid		DOT 4. See GENERAL BRAKE FLUID (https://bevo.mercedes-benz.com/index.php?language_id=1)
	Brake fluids (DOT 4 plus)		MB 331.0 brake fluid A 000 989 08 07
		The fluid level must be between the "Min." and "Max." markings on the expansion reservoir (1). If the fluid level is too low: ↓ Rectify problem subject to separate repair order. If the fluid level is too high: ↓ Extract brake fluid until the fluid level is at the "Max." mark.
	Finishing activity
3	Install covering onto brake unit	MODEL 197.3/4 with CODE B14 (Carbon-fiber engine compartment cover)