Remove/Install Charge Air Temperature Sensor Upstream Of Throttle Valve - AR09.41-P-0006SR
ENGINE 281.910 in MODEL 453
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove covering over engine | ||
| 2 | Release and disconnect electrical connection (2) | ||
| 3 | Remove safety clamp (3) | ||
| 4 | Pull charge air temperature sensor upstream of throttle valve (1) out of charge air hose (4) | ||
| 5 | Install in the reverse order | ||
| 6 | Connect diagnostic unit, read out fault memory | When replacing the charge air temperature sensor upstream of throttle valve (1). | |
| AD00.00-P-2000-06SR |