LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2016 >> Fortwo Pure, Automatic DCT Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Hydraulic & Mechanical Systems - 451 Chassis >> Maintenance >> Brake system - inspect fluid level - AP42.10-P-4210MCC

Brake system - inspect fluid level - AP42.10-P-4210MCC

Model 451.3/4 

Fig 1: Identifying Brake Fluid Reservoir
G10977955Courtesy of MERCEDES-BENZ USA
DANGER Risk of poisoning  from swallowing brake fluid. Risk of injury  from skin and eye contact with brake fluid Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. AS42.50-Z-0001-01A
DANGER Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). AS82.30-Z-0001-01A
NOTES Brake fluid notes   AH42.50-P-0001-01A
NOTES Notes on repairs to brake system   AH42.00-P-0003-01A
1 Remove maintenance flap    
2 Check fluid level    
REFER TO CAPACITIES & SPECIFICATIONS General brake fluid   DOT 4. See GENERAL BRAKE FLUID (https://bevo.mercedes-benz.com/index.php?language_id=1)
REFER TO CAPACITIES & SPECIFICATIONS Brake fluids (DOT 4 plus)   MB 331.0 brake fluid A 000 989 08 07
    IMPORTANT The brake fluid level must be between the MAX and MIN marking embossed in the brake fluid reservoir (1).
IMPORTANT If the fluid level is too low, determine and rectify the cause, subject to a separate repair order. If no cause can be found, correct the brake fluid level.
 
3 Install maintenance flap