Risk of injury from fingers being pinched and jammed at clutch pedal which snaps closed or open - AS29.10-Z-0001-01A

MODEL 901, 902, 903, 904 with ENGINE 111, 602 without CODE G40 (Automatic gearbox) 

AS29.10-Z-0001-01A	Risk of injury  from fingers being pinched and jammed at clutch pedal which snaps closed or open	Remove the overcenter spring when working in the area of the clutch pedal.
	Remove, install over-center spring of clutch pedal		AR29.10-D-0300-01A

MODEL 901, 902, 903, 904 with ENGINE 111, 602 without CODE G40 (Automatic gearbox) 

Risk of injury 

Due to the overcenter spring, there is a risk of pinching and crushing  caused by the clutch pedal shooting up or down in the event of unintentional actuation of the clutch pedal.

Safety instructions/precautions 

• Before working in the area of the clutch pedal, it is to be secured against shooting up or down by removing the overcenter spring.