Remove/Install Glove Compartment - AR68.10-P-1402SR
MODEL 453
Shown on MODEL 453.###1 with code I63 (Lockable glove compartment)
Shown on MODEL 453.###1 with code I63 (Lockable glove compartment)
| Remove/install | |||
|---|---|---|---|
| 1 | Move front passenger seat towards the rear | ||
| 2 | Unclip side paneling (2) and remove | ||
| 3 | Unclip cover (3) | ||
| 4 | Remove panel at bottom for center instrument panel | AR68.10-P-1498SR | |
| 5 | Unscrew bolts (15) and lay glove compartment (1) down in footwell | ||
| 6 | Unclip cable tie and disconnect electrical connector from right front footwell lamp (E17/15) | MODEL 453.0 (except 453.041) with CODE 877 (ambient lighting) MODEL 453.3 (except 453.341) with CODE 877 (ambient lighting) |
Fig 1 |
| 7 | Disconnect electrical connector from glove compartment lamp (E13/1) | ||
| 8 | Remove glove compartment (1) from vehicle | ||
| 9 | Remove glove compartment lamp (E13/1) | When replacing glove compartment (1). | |
| 10 | Remove right front footwell lamp (E17/15) | MODEL 453.0 (except 453.041) with CODE 877 (ambient lighting) MODEL 453.3 (except 453.341) with CODE 877 (ambient lighting) When replacing glove compartment (1). |
|
| 11 | Install in the reverse order |