Remove/Install Multifunction Camera - AR54.21-P-3000SR
MODEL 453
with CODE 238 (Active lane keeping Assist)
Shown on MODEL 453 with CODE 238 (ACTIVE LANE KEEPING ASSIST) and CODE I01 (Automatic air conditioning)
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Switch off ignition and remove key | ||
| 2 | Detach cover at bottom (1.2) from rear inside rear-view mirror (2) on inside rear-view mirror holder (3) | Make sure that the cover at the bottom (1.2) runs into the guides (5). Otherwise the catch hooks (4) can break. |
|
| 3 | Push cover at top (1.1) on rear inside rear-view mirror (2) to one side and remove cover at top (1.1) | ||
| 4 | Detach electrical connection (6) | MODEL 453 with CODE 238 (Active lane keeping Assist) with CODE I01 (Air conditioning Plus) |
|
| MODEL 453 with CODE 238 (Active lane keeping Assist) with CODE I77 (Air conditioning, manual) |
|||
| 5 | Remove bottom cover (1.2) | ||
| 6 | Disconnect electrical connector (7) | ||
| 7 | Use suitable tool to release catch hooks (8) and remove multifunction camera (9) in direction of arrow | ||
| 8 | Install in the reverse order | ||
| 9 | Calibrate multifunction camera | AR54.21-P-3002SR |