LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2016 >> Fortwo Prime, Standard Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Hydraulic & Mechanical System - Maintenance - 1 Of 2 >> Maintenance >> Brake System - Inspect Fluid Level >> Brake system - inspect fluid level - AP42.10-P-4210RT

Brake system - inspect fluid level - AP42.10-P-4210RT

MODEL 251 

Fig 1: Identifying Brake Fluid Reservoir
G10037985Courtesy of MERCEDES-BENZ USA
INSPECT Checking     
DANGER Risk of poisoning  caused by swallowing brake fluid. Risk of injury  caused by brake fluid coming into contact with skin and eyes. Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. AS42.50-Z-0001-01A
NOTES Brake fluid notes   AH42.50-P-0001-01A
NOTES Notes on repairs to brake system   AH42.00-P-0003-01A
1 Open engine hood and raise to vertical position   AR88.40-P-1000RT
2 Check fluid level in brake fluid reservoir (1) IMPORTANT The fluid level must be between the "MIN" and "MAX" markings on the brake fluid reservoir (1).
If fluid level is too high, extract brake fluid down to "MAX" marking.
If the fluid level is too low, determine cause and rectify subject to a separate invoice.
 
FLUID SPECIFICATION *BF42.10-P-1001-01H 
3 Close engine hood   AR88.40-P-1000RT
BRAKE FLUID

Number Designation Model 251
BF42.10-P-1001-01H Brake fluid Filling capacity Liters ≈0, 8
Specifications for Operating Fluids Specifications  
DOT 4. See GENERAL BRAKE FLUID (https://bevo.mercedes-benz.com/index.php?language_id=1)
  Specifications  
MB 331.0 brake fluid A 000 989 08 07