LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2016 >> Fortwo Prime, Automatic DCT Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Hydraulic & Mechanical System - Maintenance - 1 Of 2 >> Maintenance >> Brake System - Inspect Fluid Level >> Brake system - inspect fluid level - AP42.10-P-4210HA

Brake system - inspect fluid level - AP42.10-P-4210HA

MODEL 217, 222 

Shown on MODEL 222 

Fig 1: Identifying Brake Fluid Reservoir
G10037983Courtesy of MERCEDES-BENZ USA
DANGER Risk of poisoning  from swallowing brake fluid. Risk of injury  from skin and eye contact with brake fluid Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. AS42.50-Z-0001-01A
NOTES Notes on repairs to brake system   AH42.00-P-0003-01A
NOTES Brake fluid notes   AH42.50-P-0001-01A
INSPECT Check     
1 Remove left rear engine compartment paneling over brake fluid reservoir (1)    
2 Check fluid level in brake fluid reservoir (1) IMPORTANT The fluid level must be between the "MIN" and "MAX" markings on the brake fluid reservoir (1).
If the fluid level is too low:

Repair the problem, subject to separate repair order.
If the fluid level is too high:

Extract brake fluid until the fluid level is at the "MAX" mark.
 
3 Install left rear engine compartment paneling over brake fluid reservoir (1)