Retrofit navigation system - AZ82.85-P-2000MCC

MODEL 451.3/4 as of 31.8.10 

with CODE (C08) Radio preinstallation incl. rod antenna (FFO) 

except CODE (P02) car2go 

Fig 1: Identifying Navigation System Related Components

Courtesy of MERCEDES-BENZ USA

Parts scope for smart Premium radio (A2/4) 

Fig 2: Identifying Navigation System Related Components - Parts Scope For Smart Premium Radio (A2/4)

Courtesy of MERCEDES-BENZ USA

Parts scope for external USB connector connecting point (X115) and external audio source connecting point (X39/45) 

Fig 3: Identifying Navigation System Related Components - Parts Scope For (X115) And (X39/45)

Courtesy of MERCEDES-BENZ USA

	Remove
1	Remove center console cover (1)		AR68.20-P-2350MCF
2	Remove radio recess cover (2)	The radio recess cover (2) is screwed down with four screws/bolts.
3	Remove cable tie (4) and expose smart Entry radio wiring harness (3)
4	Remove dashboard bottom section on passenger side (9)	Only if the wiring harness (8) is to be installed with the external USB connector connecting point (X115) and external audio source connecting point (X39/45). * not for USA	AR68.10-P-1502MCC
		* for USA only	AR68.10-P-1502MCU
	Install
5	Insert wiring harness (8) with the external connector connecting point (X115) and the external audio source connecting point (X39/45) into the cutout at the passenger-side instrument panel lower section (9) and install the passenger-side instrument panel lower section (9)	Only if the wiring harness (8) is to be installed with the external USB connector connecting point (X115) and external audio source connecting point (X39/45). Route the wiring harness (8) with the external USB connector connecting point (X115) and the external audio source connecting point (X39/45) in the slot of the smart Premium radio (A2/4). If a glove box (10) is also to be installed in the course of retrofitting the wiring harness (8), a different passenger-side instrument panel lower section (9) must be installed. * not for USA	AR68.10-P-1502MCC
		* for USA only	AR68.10-P-1502MCU
6	Install GPS antenna (A2/23)		AR82.85-P-0002MCC
7	Install smart Premium radio (A2/4)	* not for USA	AR82.60-P-7502MCC
		* for USA only	AR82.60-P-7502MCU
8	Install center console cover (1)		AR68.20-P-2350MCF
9	Connect Star Diagnosis		AD00.00-P-2000-04MCC
10	Enter special equipment on the vehicle data card and the online vehicle data card	Add code (527) High-Line radio.
11	Disconnect Star Diagnosis		AD00.00-P-2000-04MCC
12	Enter security code of smart Premium radio (A2/4), change if necessary	The security code is set to "0000" by default at the factory. If the security code is to be changed, it must be documented in writing.
13	Adapt audio settings
	Notes on audio settings		AH82.60-P-0002-01MCC
14	Document retrofitted equipment using vehicle documentation (VeDoc)	Attach note "smart Premium radio retrofitted as per AZ82.85-P-2000MCC " as well as serial number of smart Premium radio (A2/4) below field organization texts .