Use of gloss preserver - AP98.00-P-0641SM

MODEL 450, 451, 452, 454 

	Application
	Gloss preserver acts as a protection against weathering and preserves the existing luster. Treatment should be repeated every 3 to 6 months depending on weathering.
1	Wash and dry the vehicle	Other contaminants, such as tar splashes and industrial deposits should be removed before using gloss preserver.
2	Rub gloss preserver into the surface of the paintwork.	Do not work in the sun or on body parts which have warmed-through as this may lead to severe paint damage. Shake cans vigorously before use. Apply onto clean polishing wad or clean polishing cloth and rub in evenly to produce a thin unbroken film.	*BR00.45-Z-1014-04A
3	Rub off gloss preserver	After drying, a white film is formed. Buff up with a clean polishing wad until the surface is clear.

AUXILIARY REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1014-04A	Gloss preservation, 500 ml, DB supply specification 7551.10	A 000 986 44 74