Rear axle carrier - BA35.10-P-1000-01O

MODEL 221 with CODE Z07 (Top protection) with CODE Z19 (S600 Pullman Guard state sedan)

MODEL 221 with CODE Z07 (Top protection)

REAR AXLE CARRIER

Number	Designation				MODEL 221 with CODE Z07/Z07+Z19
BA35.10-P-1001-01O	Self-locking screw/bolt, front rear axle carrier rubber bushing to frame floor	Stage 1	M12x1.5	Nm	80
		Stage 1	M14x1.5	Nm	140
		Stage 2		∠°	90
BA35.10-P-1002-01O	Self-locking screw/bolt, rear axle carrier rear rubber bushing to frame floor	Stage 1	M12x1.5	Nm	80
		Stage 1	M14x1.5	Nm	140
		Stage 2		∠°	90
BA35.10-P-1003-01O	Self-locking screw/bolt, front crossmember to rear axle carrier	Stage 1		Nm	50
BA35.10-P-1003-01O		Stage 2		∠°	90
BA35.10-P-1004-01O	Self-locking nut securing rear extension bracket to rear axle carrier	Stage 1		Nm	100
BA35.10-P-1004-01O		Stage 2		∠°	90
BA35.10-P-1005-01O	Screw/bolt, extension bracket to rear axle differential	M12x1.5		Nm	100
BA35.10-P-1005-01O	Screw/bolt, extension bracket to rear axle differential	M12x1.75		Nm	120
BA35.10-P-1006-01O	Adapter to rear axle differential	Stage 1		Nm	110
BA35.10-P-1006-01O	Adapter to rear axle differential	Stage 2		∠°	90
BA35.10-P-1007-01O	Adapter to front transverse bridge	Stage 1		Nm	50
BA35.10-P-1007-01O	Adapter to front transverse bridge	Stage 2		∠°	90
BA35.10-P-1008-01O	Screw/bolt, stop to longitudinal member			Nm	35