Wheel location, wheel hub - BA33.20-P-1000-01K
MODEL 219.3
WHEEL CONTROL, HUB
| Number | Designation | MODEL 219.3 | ||
|---|---|---|---|---|
| BA33.20-P-1001-01K | Bolt for clamp nut to adjust front axle wheel bearing play | Nm | 11 | |
| BA33.20-P-1002-01K | Self-locking nut of upper wishbone on front end | Nm | 50 | |
| BA33.20-P-1003-01K | Self-locking nut, track control arm to stub axle | Stage 1 | Nm | 50 |
| Stage 2 | ∠° | 60 | ||
| BA33.20-P-1004-01K | Self-locking nut, strut rod to steering knuckle | Stage 1 | Nm | 50 |
| Stage 2 | ∠° | 60 | ||
| BA33.20-P-1005-01K | Self-locking nut, spring control arm to front axle carrier | Stage 1 | Nm | 80 |
| Stage 2 | ∠° | 120 | ||
| BA33.20-P-1006-01K | Self-locking nut, torque strut to front axle carrier | Stage 1 | Nm | 80 |
| Stage 2 | ∠° | 120 | ||
| BA33.20-P-1007-01K | Self-locking nut, supporting joint to steering knuckle | Stage 1 | Nm | 50 |
| Stage 2 | ∠° | 60 | ||
| BA33.20-P-1008-01K | Self-locking nut, upper ball joint out of upper transverse control arm to steering knuckle | Stage 1 | Nm | 20 |
| Stage 2 | ∠° | 90 | ||
| BA33.20-P-1009-01K | Nut, follower joint to upper transverse control arm | Stage 1 | Nm | 20 |
| Stage 2 | ∠° | 45 | ||