Remove/install seat belt buckle (front seat) - AR91.40-P-1515MCU
MODEL 451.3/4
| Removal | |||
| Risk of injury caused by backrest suddenly folding forward if release lever is accidentally operated during inspection and repair work | When working on the seat, be careful not to accidentally release the backrest mechanism allowing the seat to fold forward. Keep body parts clear of the backrest travel area. | AS91.00-Z-0005-01V | |
| 1.1 | Remove driver seat | When removing seat belt buckle (1) from driver seat. | AR91.10-P-1010MCU |
| 1.2 | Remove passenger seat | When removing seat belt buckle (1) from front passenger seat. | AR91.10-P-1020MCU |
| 2 | Expose seat belt buckle wiring harness (4), remove bolt (3) and remove seat belt buckle (1) from backrest frame (2) | AR91.40-P-1515-01MCU | |
| Install | |||
| 3 | Install belt buckle (1) | AR91.40-P-1515-02MCU | |
| *BA91.10-P-1002-01P | |||
| *BA91.40-P-1003-01G | |||
| 4.1 | Install driver seat | When installing seat belt buckle (1) on driver seat. | AR91.10-P-1010MCU |
| 4.2 | Install front passenger seat | When installing seat belt buckle (1) on front passenger seat. | AR91.10-P-1020MCU |
FRONT SEATS
| Number | Designation | Model 451.3/4 | |
|---|---|---|---|
| BA91.10-P-1002-01P | Bolt of backrest frame to seat frame | Nm | 45 |
SEAT BELTS/EMERGENCY TENSIONING RETRACTORS
| Number | Designation | Model 451.3/4 | |
|---|---|---|---|
| BA91.40-P-1003-01G | Screw on seat belt buckle | Nm | 30 |