124 589 04 33 00 Puller - WS26.00-P-0029C

TRANSMISSION 711.6, 716.7, 717.45/46, 722.96, 724.0 

Use in FG 26/27/Satz C 

Intended use: 

Puller for bushing of reverse idler gear of main shaft (transmission 717.45/46  ) or for pulling off synchronizer body of output shaft (transmission 711.640/641  ).

Transmission 724.0 

For disassembling the output shaft.

Transmission 716.7 

For pulling off the output flange.

Fig 1: Identifying Puller (124 589 04 33 00) (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Puller (124 589 04 33 00) (2 Of 2)

Courtesy of MERCEDES-BENZ USA