000 588 13 21 00 Suspension measuring unit - WS40.00-P-0013B

MODEL ALL

Use in FG 40/Set B

Intended use:

Car suspension measuring unit for measuring suspension geometry.

Test equipment category CAT_B.

Procurement information:

The sale and distribution of this workshop equipment does not take place via the regular replacement part ordering process at the GLC/LC but directly via the manufacturer/supplier. Recommended workshop equipment and information on the manufacturers/suppliers can be found below .

Fig 1: Identifying Suspension Measuring Unit (000 588 13 21 00)

Courtesy of MERCEDES-BENZ USA

NOTE: The suspension measuring units listed here operate according to the following measuring method

Electronic with 3D camera technology
Electronic with radio frequency

The suspension geometry on heavy-duty vans from Mercedes-Benz can also be measured using the suspension measuring units listed below.

Manufacturer 1

Automotive Testing Technologies GmbH

Type/model: CURA S960 MB Article no.: 0986400A59A

Manufacturer 2

Beissbarth GmbH

Type/model: ML 81 TECH Article no.: 932 500 049

Manufacturer 3

Corghi S.p.A.

Type/model: Exact 7000 MB Article no.: 0-33104601/31

Manufacturer 4

Hunter Deutschland GmbH

Type/model: HTA-MB-E (XF) Article no.: HTA-MB-E (XF)
Type/model: HTA-MB-R Article no.: HTA-MB-R

Manufacturer 5

Otto Nusbaum GmbH & Co. KG

Type/model: HTA-MB-E (XF) Article no.: HTA-MB-E (XF)
Type/model: WA 970 MB Article no.: 0986400A59N

Manufacturer 6

Snap-on Equipment srl

Type/model: Hofmann - Geoliner 680 MB Gen II Article no.: EEWAEU713AM7
Type/model: Hofmann - Geoliner 780 MB Gen II Article no.: EEWAEU716AM2
Type/model: John Bean - Visualiner 3D Arago MB Gen II Article no.: EEWAEU550AM2
Type/model: John Bean - Visualiner 3D2 MB Gen II Article no.: EEWAEU546AM9