000 588 05 19 00 Inclinometer - WS40.00-P-0007B

MODEL ALL

Use in FG 40/Set B

Purpose:

Electronic inclinometer/vehicle level measuring instrument for measuring angles at defined contact points.

Test equipment category CAT_A.

Procurement information:

The sale and distribution of this workshop equipment does not take place via the regular replacement part ordering process at the GLC/LC but directly via the manufacturer/supplier. Recommended workshop equipment and information on the manufacturers/suppliers can be found below .

Fig 1: Identifying Inclinometer (000 588 05 19 00)

Courtesy of MERCEDES-BENZ USA

NOTE: Device CM 09606-10 is the basic unit for angle measurement. It is used to determine the vehicle level.

The combined measuring instrument 09905-30 has an additional measuring mode for determining the inclination angle and displaying it on the display.

The adapters listed here are used for angle measurement for determining the vehicle level. Further adapters for inclination angle measurement can be found under W 000 588 04 19 00 Inclinometer.

Manufacturer

ROMESS Rogg Apparate + Electronic GmbH

Type/model: Electronic inclinometer Article no. CM 09606-10
Type/model: Electronic inclinometer (combined measuring unit) Article no.: 09905-30
Accessories: MHN rear axle adapter (M-Class) Article no.: 09606-61
Accessories: MV front axle adapter (M-Class) Article no.: 09606-60
Accessories: Standard adapter Article no.: 09606-50
Accessories: Angle adapter 414 (VANEO) Article no.: 09606-62