Remove suspension travel limiter - AP32.25-P-3270A

MODEL 190 

Fig 1: Identifying Suspension Dust Boot & Piston Rod

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Dust Boot, Spring Cup And Suspension Travel Limiter

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Suspension Travel Limiter

Courtesy of MERCEDES-BENZ USA

Fig 4: Identifying Speed Specification And Inside Rearview Mirror

Courtesy of MERCEDES-BENZ USA

Fig 5: Identifying Speed Specification Tag

Courtesy of MERCEDES-BENZ USA

	Remove
1	Lift vehicle on vehicle lift
			AR00.60-P-1000RG
2	Remove suspension travel limiter (4) between dust boots (1) and spring retainers (3)	It must be ensured that all  installed suspension travel limiters (4) at each damper are removed! The suspension and/or underfloor can otherwise be damaged.
3	Slide dust boots (1) on piston rods (2) in upward direction
4	Lower vehicle
5	Remove speed specification (5) from inside rearview mirror (6)