General notes on repair work on vehicles with ADS - AH32.32-P-9406-01A

MODEL 129, 140, 210 with CODE 217 (Level control on rear axle with ADS) 

Measures during repair work: 

If strong physical shocks could occur during repair work in the area of the acceleration sensors, e.g. due to hammer blows, bodywork etc., remove the affected acceleration sensors first.

Shown on model 140 

Fig 1: Identifying Left/Right Front Body Acceleration Sensors (Shown On Model 140)

Courtesy of MERCEDES-BENZ USA

Shown on model 140 

Fig 2: Identifying Right Rear Body Acceleration Sensor (Shown On Model 140)

Courtesy of MERCEDES-BENZ USA