Power steering pump - BA46.30-P-1000-01C
MODEL 197, 199, 215 (except 215.373), 220 (except 220.126), 240
POWER STEERING PUMP
| Number | Designation | MODEL 197 | MODEL 199 | ||
|---|---|---|---|---|---|
| BA46.30-P-1001-01C | Bolt on belt pulley | Nm | - | - | |
| BA46.30-P-1002-01C | Return line to power steering pump | Nm | - | - | |
| BA46.30-P-1003-01C | High-pressure expansion hose to power steering pump | M14X1.5 | Nm | 40 | |
| M16X1.5 | Nm | 40 | |||
| BA46.30-P-1004-01C | High-pressure hose, tandem pump | Nm | - | - | |
| BA46.30-P-1005-01C | Screw, power steering pump to cylinder liner collar seat or crankcase | Nm | - | - | |
| BA46.30-P-1006-01C | High pressure flexible hose to pipe or pipe system (RHD only) | Nm | - | - | |
| BA46.30-P-1007-01C | Bolt, belt pulley to power steering pump | Nm | - | - | |
| BA46.30-P-1008-01C | Bolt, power steering pump to support | Nm | - | - | |
| BA46.30-P-1009-01C | Bolt, power steering pump to timing case cover | Nm | - | - | |
| BA46.30-P-1010-01C | Self-tapping bolt, power steering pump to timing case | Thread not pre-tapped | Nm | - | - |
| Thread pre-tapped | Nm | - | - | ||
| BA46.30-P-1011-01C | Nut, power steering pump to timing case | Nm | - | - | |
| BA46.30-P-1012-01C | Banjo bolt, high pressure expansion hose (Active Body Control) to power steering pump | Nm | - | - | |
| BA46.30-P-1013-01C | Bolt, belt pulley to ABC pump | Nm | - | - | |
| BA46.30-P-1014-01C | Banjo bolt, high pressure expansion hose (active body control) to ABC pump | Nm | - | - | |
| BA46.30-P-1015-01C | Bolt, high-pressure hose bracket to oil pan | Nm | - | - | |
| BA46.30-P-1016-01C | Banjo bolt, high pressure expansion hose to power steering pump | Nm | 45 | - | |
| BA46.30-P-1017-01C | Union nut, high pressure hose to power steering pump high-pressure line | Nm | - | - | |
| BA46.30-P-1018-01C | Bolt, power steering pump to rear of timing case cover | Nm | - | - | |
| BA46.30-P-1019-01C | Banjo bolt, pulsation damper and high-pressure line to power steering pump | Nm | - | - | |
| BA46.30-P-1020-01C | Union nut, high-pressure line to power steering pump | Nm | 40 | 40 | |
| BA46.30-P-1021-01C | Bolt, power steering pump bracket to crankcase | Nm | - | - | |
| BA46.30-P-1022-01C | Nut, power steering pump to bracket | Nm | - | - | |
| BA46.30-P-1023-01C | Bolt, retaining clamp of high pressure line to bracket or to crankcase | Nm | - | - | |
| BA46.30-P-1024-01C | Bolt, bracket of high pressure line to engine mount | Nm | - | - | |
| BA46.30-P-1025-01C | Bolt, return line bracket to front axle carrier | Nm | - | - | |
| BA46.30-P-1026-01C | Bolt, belt pulley to tandem pump | Nm | - | - | |
| BA46.30-P-1027-01C | Banjo bolt, pulsation damper to power steering pump | Nm | - | - | |
| BA46.30-P-1028-01C | Bolt, high-pressure expansion hose bracket to power steering pump bracket | Nm | - | - | |
| BA46.30-P-1029-01C | Bolt, high pressure line retaining clamp to engine support | Nm | - | - | |
| BA46.30-P-1030-01C | Bolt for power steering pump attachment | Nm | 20 | 20 | |
| BA46.30-P-1031-01C | Bolt, ABC pressure line bracket to timing case | Nm | - | - | |
| BA46.30-P-1032-01C | Union nut, high-pressure hose to power steering line | Nm | - | - | |
| BA46.30-P-1033-01C | Nut, power steering pump to crankcase | Nm | - | - | |
| BA46.30-P-1034-01C | Bolt, ABC pressure line to power steering pump | Nm | - | - | |
| BA46.30-P-1035-01C | Bolt, retaining clamp to power steering pump | Nm | - | - | |
| BA46.30-P-1036-01C | Bolt, power steering expansion reservoir to front cover at cylinder head | Nm | - | - | |
| BA46.30-P-1037-01C | Bolt, high-pressure line to frame-type integral support | Nm | 8 | - | |
| BA46.30-P-1038-01C | Bolt, low-pressure line to cooler | Nm | 7 | - | |
| BA46.30-P-1039-01C | Bolt, low-pressure line to high-pressure line | Nm | 8 | - | |
POWER STEERING PUMP
| Number | Designation | MODEL 215.375/378 | MODEL 215.374/376/379, 220.176/179 with CODE 487 (Active Body Control (ABC)) | ||
|---|---|---|---|---|---|
| BA46.30-P-1001-01C | Bolt on belt pulley | Nm | - | - | |
| BA46.30-P-1002-01C | Return line to power steering pump | Nm | - | - | |
| BA46.30-P-1003-01C | High-pressure expansion hose to power steering pump | M14X1.5 | Nm | - | - |
| M16X1.5 | Nm | 40 | 40 | ||
| BA46.30-P-1004-01C | High-pressure hose, tandem pump | Nm | - | - | |
| BA46.30-P-1005-01C | Screw, power steering pump to cylinder liner collar seat or crankcase | Nm | - | - | |
| BA46.30-P-1006-01C | High pressure flexible hose to pipe or pipe system (RHD only) | Nm | - | - | |
| BA46.30-P-1007-01C | Bolt, belt pulley to power steering pump | Nm | 30 | 30 | |
| BA46.30-P-1008-01C | Bolt, power steering pump to support | Nm | - | - | |
| BA46.30-P-1009-01C | Bolt, power steering pump to timing case cover | Nm | - | 20 | |
| BA46.30-P-1010-01C | Self-tapping bolt, power steering pump to timing case | Thread not pre-tapped | Nm | 35 | - |
| Thread pre-tapped | Nm | 20 | - | ||
| BA46.30-P-1011-01C | Nut, power steering pump to timing case | Nm | - | 20 | |
| BA46.30-P-1012-01C | Banjo bolt, high pressure expansion hose (Active Body Control) to power steering pump | Nm | 45 | 40 | |
| BA46.30-P-1013-01C | Bolt, belt pulley to ABC pump | Nm | - | - | |
| BA46.30-P-1014-01C | Banjo bolt, high pressure expansion hose (active body control) to ABC pump | Nm | - | - | |
| BA46.30-P-1015-01C | Bolt, high-pressure hose bracket to oil pan | Nm | - | 8 | |
| BA46.30-P-1016-01C | Banjo bolt, high pressure expansion hose to power steering pump | Nm | - | - | |
| BA46.30-P-1017-01C | Union nut, high pressure hose to power steering pump high-pressure line | Nm | 40 | 40 | |
| BA46.30-P-1018-01C | Bolt, power steering pump to rear of timing case cover | Nm | - | 20 | |
| BA46.30-P-1019-01C | Banjo bolt, pulsation damper and high-pressure line to power steering pump | Nm | - | - | |
| BA46.30-P-1020-01C | Union nut, high-pressure line to power steering pump | Nm | - | 40 | |
| BA46.30-P-1021-01C | Bolt, power steering pump bracket to crankcase | Nm | - | - | |
| BA46.30-P-1022-01C | Nut, power steering pump to bracket | Nm | - | - | |
| BA46.30-P-1023-01C | Bolt, retaining clamp of high pressure line to bracket or to crankcase | Nm | - | - | |
| BA46.30-P-1024-01C | Bolt, bracket of high pressure line to engine mount | Nm | - | 8 | |
| BA46.30-P-1025-01C | Bolt, return line bracket to front axle carrier | Nm | - | 6 | |
| BA46.30-P-1026-01C | Bolt, belt pulley to tandem pump | Nm | - | - | |
| BA46.30-P-1027-01C | Banjo bolt, pulsation damper to power steering pump | Nm | - | - | |
| BA46.30-P-1028-01C | Bolt, high-pressure expansion hose bracket to power steering pump bracket | Nm | - | - | |
| BA46.30-P-1029-01C | Bolt, high pressure line retaining clamp to engine support | Nm | - | 8 | |
| BA46.30-P-1030-01C | Bolt for power steering pump attachment | Nm | - | - | |
| BA46.30-P-1031-01C | Bolt, ABC pressure line bracket to timing case | Nm | - | - | |
| BA46.30-P-1032-01C | Union nut, high-pressure hose to power steering line | Nm | - | - | |
| BA46.30-P-1033-01C | Nut, power steering pump to crankcase | Nm | - | - | |
| BA46.30-P-1034-01C | Bolt, ABC pressure line to power steering pump | Nm | - | - | |
| BA46.30-P-1035-01C | Bolt, retaining clamp to power steering pump | Nm | - | - | |
| BA46.30-P-1036-01C | Bolt, power steering expansion reservoir to front cover at cylinder head | Nm | - | - | |
| BA46.30-P-1037-01C | Bolt, high-pressure line to frame-type integral support | Nm | - | - | |
| BA46.30-P-1038-01C | Bolt, low-pressure line to cooler | Nm | - | - | |
| BA46.30-P-1039-01C | Bolt, low-pressure line to high-pressure line | Nm | - | - | |
POWER STEERING PUMP
| Number | Designation | MODEL 220.025/026/125 | MODEL 220.028/128 except CODE 487 (Active Body Control (ABC)) | ||
|---|---|---|---|---|---|
| BA46.30-P-1001-01C | Bolt on belt pulley | Nm | 25 | 25 | |
| BA46.30-P-1002-01C | Return line to power steering pump | Nm | 2 | - | |
| BA46.30-P-1003-01C | High-pressure expansion hose to power steering pump | M14X1.5 | Nm | - | - |
| M16X1.5 | Nm | 40 | 40 | ||
| BA46.30-P-1004-01C | High-pressure hose, tandem pump | Nm | - | - | |
| BA46.30-P-1005-01C | Screw, power steering pump to cylinder liner collar seat or crankcase | Nm | - | - | |
| BA46.30-P-1006-01C | High pressure flexible hose to pipe or pipe system (RHD only) | Nm | - | - | |
| BA46.30-P-1007-01C | Bolt, belt pulley to power steering pump | Nm | - | - | |
| BA46.30-P-1008-01C | Bolt, power steering pump to support | Nm | - | 20 | |
| BA46.30-P-1009-01C | Bolt, power steering pump to timing case cover | Nm | 20 | 20 | |
| BA46.30-P-1010-01C | Self-tapping bolt, power steering pump to timing case | Thread not pre-tapped | Nm | - | - |
| Thread pre-tapped | Nm | - | - | ||
| BA46.30-P-1011-01C | Nut, power steering pump to timing case | Nm | - | - | |
| BA46.30-P-1012-01C | Banjo bolt, high pressure expansion hose (Active Body Control) to power steering pump | Nm | - | - | |
| BA46.30-P-1013-01C | Bolt, belt pulley to ABC pump | Nm | - | - | |
| BA46.30-P-1014-01C | Banjo bolt, high pressure expansion hose (active body control) to ABC pump | Nm | - | - | |
| BA46.30-P-1015-01C | Bolt, high-pressure hose bracket to oil pan | Nm | - | - | |
| BA46.30-P-1016-01C | Banjo bolt, high pressure expansion hose to power steering pump | Nm | - | - | |
| BA46.30-P-1017-01C | Union nut, high pressure hose to power steering pump high-pressure line | Nm | - | 40 | |
| BA46.30-P-1018-01C | Bolt, power steering pump to rear of timing case cover | Nm | - | - | |
| BA46.30-P-1019-01C | Banjo bolt, pulsation damper and high-pressure line to power steering pump | Nm | - | - | |
| BA46.30-P-1020-01C | Union nut, high-pressure line to power steering pump | Nm | - | - | |
| BA46.30-P-1021-01C | Bolt, power steering pump bracket to crankcase | Nm | - | - | |
| BA46.30-P-1022-01C | Nut, power steering pump to bracket | Nm | - | - | |
| BA46.30-P-1023-01C | Bolt, retaining clamp of high pressure line to bracket or to crankcase | Nm | - | - | |
| BA46.30-P-1024-01C | Bolt, bracket of high pressure line to engine mount | Nm | - | - | |
| BA46.30-P-1025-01C | Bolt, return line bracket to front axle carrier | Nm | - | - | |
| BA46.30-P-1026-01C | Bolt, belt pulley to tandem pump | Nm | - | - | |
| BA46.30-P-1027-01C | Banjo bolt, pulsation damper to power steering pump | Nm | - | - | |
| BA46.30-P-1028-01C | Bolt, high-pressure expansion hose bracket to power steering pump bracket | Nm | - | - | |
| BA46.30-P-1029-01C | Bolt, high pressure line retaining clamp to engine support | Nm | - | - | |
| BA46.30-P-1030-01C | Bolt for power steering pump attachment | Nm | - | - | |
| BA46.30-P-1031-01C | Bolt, ABC pressure line bracket to timing case | Nm | - | - | |
| BA46.30-P-1032-01C | Union nut, high-pressure hose to power steering line | Nm | - | - | |
| BA46.30-P-1033-01C | Nut, power steering pump to crankcase | Nm | - | - | |
| BA46.30-P-1034-01C | Bolt, ABC pressure line to power steering pump | Nm | - | - | |
| BA46.30-P-1035-01C | Bolt, retaining clamp to power steering pump | Nm | - | - | |
| BA46.30-P-1036-01C | Bolt, power steering expansion reservoir to front cover at cylinder head | Nm | - | - | |
| BA46.30-P-1037-01C | Bolt, high-pressure line to frame-type integral support | Nm | - | - | |
| BA46.30-P-1038-01C | Bolt, low-pressure line to cooler | Nm | - | - | |
| BA46.30-P-1039-01C | Bolt, low-pressure line to high-pressure line | Nm | - | - | |
POWER STEERING PUMP
| Number | Designation | MODEL 220.028/128 with CODE 487 (Active Body Control (ABC)) | MODEL 220.063/065/067/070/073/075/163/165/167/170/173/175/875 except CODE 487 | ||
|---|---|---|---|---|---|
| BA46.30-P-1001-01C | Bolt on belt pulley | Nm | - | - | |
| BA46.30-P-1002-01C | Return line to power steering pump | Nm | - | 2 | |
| BA46.30-P-1003-01C | High-pressure expansion hose to power steering pump | M14X1.5 | Nm | - | - |
| M16X1.5 | Nm | - | 40 | ||
| BA46.30-P-1004-01C | High-pressure hose, tandem pump | Nm | - | - | |
| BA46.30-P-1005-01C | Screw, power steering pump to cylinder liner collar seat or crankcase | Nm | - | 25 | |
| BA46.30-P-1006-01C | High pressure flexible hose to pipe or pipe system (RHD only) | Nm | - | - | |
| BA46.30-P-1007-01C | Bolt, belt pulley to power steering pump | Nm | 30 | - | |
| BA46.30-P-1008-01C | Bolt, power steering pump to support | Nm | - | - | |
| BA46.30-P-1009-01C | Bolt, power steering pump to timing case cover | Nm | - | - | |
| BA46.30-P-1010-01C | Self-tapping bolt, power steering pump to timing case | Thread not pre-tapped | Nm | 35 | 35 |
| Thread pre-tapped | Nm | 20 | 20 | ||
| BA46.30-P-1011-01C | Nut, power steering pump to timing case | Nm | - | - | |
| BA46.30-P-1012-01C | Banjo bolt, high pressure expansion hose (Active Body Control) to power steering pump | Nm | - | - | |
| BA46.30-P-1013-01C | Bolt, belt pulley to ABC pump | Nm | - | - | |
| BA46.30-P-1014-01C | Banjo bolt, high pressure expansion hose (active body control) to ABC pump | Nm | - | - | |
| BA46.30-P-1015-01C | Bolt, high-pressure hose bracket to oil pan | Nm | - | - | |
| BA46.30-P-1016-01C | Banjo bolt, high pressure expansion hose to power steering pump | Nm | - | - | |
| BA46.30-P-1017-01C | Union nut, high pressure hose to power steering pump high-pressure line | Nm | 40 | - | |
| BA46.30-P-1018-01C | Bolt, power steering pump to rear of timing case cover | Nm | - | - | |
| BA46.30-P-1019-01C | Banjo bolt, pulsation damper and high-pressure line to power steering pump | Nm | 40 | - | |
| BA46.30-P-1020-01C | Union nut, high-pressure line to power steering pump | Nm | 40 | - | |
| BA46.30-P-1021-01C | Bolt, power steering pump bracket to crankcase | Nm | 20 | - | |
| BA46.30-P-1022-01C | Nut, power steering pump to bracket | Nm | 20 | - | |
| BA46.30-P-1023-01C | Bolt, retaining clamp of high pressure line to bracket or to crankcase | Nm | 9 | - | |
| BA46.30-P-1024-01C | Bolt, bracket of high pressure line to engine mount | Nm | - | - | |
| BA46.30-P-1025-01C | Bolt, return line bracket to front axle carrier | Nm | - | - | |
| BA46.30-P-1026-01C | Bolt, belt pulley to tandem pump | Nm | - | - | |
| BA46.30-P-1027-01C | Banjo bolt, pulsation damper to power steering pump | Nm | - | - | |
| BA46.30-P-1028-01C | Bolt, high-pressure expansion hose bracket to power steering pump bracket | Nm | - | - | |
| BA46.30-P-1029-01C | Bolt, high pressure line retaining clamp to engine support | Nm | - | - | |
| BA46.30-P-1030-01C | Bolt for power steering pump attachment | Nm | - | - | |
| BA46.30-P-1031-01C | Bolt, ABC pressure line bracket to timing case | Nm | - | - | |
| BA46.30-P-1032-01C | Union nut, high-pressure hose to power steering line | Nm | - | - | |
| BA46.30-P-1033-01C | Nut, power steering pump to crankcase | Nm | - | - | |
| BA46.30-P-1034-01C | Bolt, ABC pressure line to power steering pump | Nm | - | - | |
| BA46.30-P-1035-01C | Bolt, retaining clamp to power steering pump | Nm | - | - | |
| BA46.30-P-1036-01C | Bolt, power steering expansion reservoir to front cover at cylinder head | Nm | - | - | |
| BA46.30-P-1037-01C | Bolt, high-pressure line to frame-type integral support | Nm | - | - | |
| BA46.30-P-1038-01C | Bolt, low-pressure line to cooler | Nm | - | - | |
| BA46.30-P-1039-01C | Bolt, low-pressure line to high-pressure line | Nm | - | - | |
POWER STEERING PUMP
| Number | Designation | MODEL 220.063/065/067/070/073/075/163/165/167/170/173/175/875 with CODE 487 | MODEL 220.178/878 with CODE 487 | ||
|---|---|---|---|---|---|
| BA46.30-P-1001-01C | Bolt on belt pulley | Nm | - | - | |
| BA46.30-P-1002-01C | Return line to power steering pump | Nm | - | - | |
| BA46.30-P-1003-01C | High-pressure expansion hose to power steering pump | M14X1.5 | Nm | - | - |
| M16X1.5 | Nm | 40 | 40 | ||
| BA46.30-P-1004-01C | High-pressure hose, tandem pump | Nm | - | - | |
| BA46.30-P-1005-01C | Screw, power steering pump to cylinder liner collar seat or crankcase | Nm | - | - | |
| BA46.30-P-1006-01C | High pressure flexible hose to pipe or pipe system (RHD only) | Nm | - | - | |
| BA46.30-P-1007-01C | Bolt, belt pulley to power steering pump | Nm | 30 | 30 | |
| BA46.30-P-1008-01C | Bolt, power steering pump to support | Nm | - | - | |
| BA46.30-P-1009-01C | Bolt, power steering pump to timing case cover | Nm | - | - | |
| BA46.30-P-1010-01C | Self-tapping bolt, power steering pump to timing case | Thread not pre-tapped | Nm | 35 | 35 |
| Thread pre-tapped | Nm | 20 | 20 | ||
| BA46.30-P-1011-01C | Nut, power steering pump to timing case | Nm | - | - | |
| BA46.30-P-1012-01C | Banjo bolt, high pressure expansion hose (Active Body Control) to power steering pump | Nm | 45 | 45 | |
| BA46.30-P-1013-01C | Bolt, belt pulley to ABC pump | Nm | - | - | |
| BA46.30-P-1014-01C | Banjo bolt, high pressure expansion hose (active body control) to ABC pump | Nm | - | - | |
| BA46.30-P-1015-01C | Bolt, high-pressure hose bracket to oil pan | Nm | - | - | |
| BA46.30-P-1016-01C | Banjo bolt, high pressure expansion hose to power steering pump | Nm | - | - | |
| BA46.30-P-1017-01C | Union nut, high pressure hose to power steering pump high-pressure line | Nm | - | - | |
| BA46.30-P-1018-01C | Bolt, power steering pump to rear of timing case cover | Nm | - | - | |
| BA46.30-P-1019-01C | Banjo bolt, pulsation damper and high-pressure line to power steering pump | Nm | - | - | |
| BA46.30-P-1020-01C | Union nut, high-pressure line to power steering pump | Nm | - | - | |
| BA46.30-P-1021-01C | Bolt, power steering pump bracket to crankcase | Nm | - | - | |
| BA46.30-P-1022-01C | Nut, power steering pump to bracket | Nm | - | - | |
| BA46.30-P-1023-01C | Bolt, retaining clamp of high pressure line to bracket or to crankcase | Nm | - | - | |
| BA46.30-P-1024-01C | Bolt, bracket of high pressure line to engine mount | Nm | - | - | |
| BA46.30-P-1025-01C | Bolt, return line bracket to front axle carrier | Nm | - | - | |
| BA46.30-P-1026-01C | Bolt, belt pulley to tandem pump | Nm | - | - | |
| BA46.30-P-1027-01C | Banjo bolt, pulsation damper to power steering pump | Nm | - | - | |
| BA46.30-P-1028-01C | Bolt, high-pressure expansion hose bracket to power steering pump bracket | Nm | - | - | |
| BA46.30-P-1029-01C | Bolt, high pressure line retaining clamp to engine support | Nm | - | - | |
| BA46.30-P-1030-01C | Bolt for power steering pump attachment | Nm | - | - | |
| BA46.30-P-1031-01C | Bolt, ABC pressure line bracket to timing case | Nm | - | - | |
| BA46.30-P-1032-01C | Union nut, high-pressure hose to power steering line | Nm | - | - | |
| BA46.30-P-1033-01C | Nut, power steering pump to crankcase | Nm | - | - | |
| BA46.30-P-1034-01C | Bolt, ABC pressure line to power steering pump | Nm | - | - | |
| BA46.30-P-1035-01C | Bolt, retaining clamp to power steering pump | Nm | - | - | |
| BA46.30-P-1036-01C | Bolt, power steering expansion reservoir to front cover at cylinder head | Nm | - | - | |
| BA46.30-P-1037-01C | Bolt, high-pressure line to frame-type integral support | Nm | - | - | |
| BA46.30-P-1038-01C | Bolt, low-pressure line to cooler | Nm | - | - | |
| BA46.30-P-1039-01C | Bolt, low-pressure line to high-pressure line | Nm | - | - | |
POWER STEERING PUMP
| Number | Designation | MODEL 220.083/084/087/183/184/187 | MODEL 220.074/174 | ||
|---|---|---|---|---|---|
| BA46.30-P-1001-01C | Bolt on belt pulley | Nm | - | - | |
| BA46.30-P-1002-01C | Return line to power steering pump | Nm | - | - | |
| BA46.30-P-1003-01C | High-pressure expansion hose to power steering pump | M14X1.5 | Nm | - | - |
| M16X1.5 | Nm | - | 40 | ||
| BA46.30-P-1004-01C | High-pressure hose, tandem pump | Nm | - | - | |
| BA46.30-P-1005-01C | Screw, power steering pump to cylinder liner collar seat or crankcase | Nm | - | - | |
| BA46.30-P-1006-01C | High pressure flexible hose to pipe or pipe system (RHD only) | Nm | - | - | |
| BA46.30-P-1007-01C | Bolt, belt pulley to power steering pump | Nm | - | 30 | |
| BA46.30-P-1008-01C | Bolt, power steering pump to support | Nm | - | - | |
| BA46.30-P-1009-01C | Bolt, power steering pump to timing case cover | Nm | - | - | |
| BA46.30-P-1010-01C | Self-tapping bolt, power steering pump to timing case | Thread not pre-tapped | Nm | 35 | 35 |
| Thread pre-tapped | Nm | 20 | 20 | ||
| BA46.30-P-1011-01C | Nut, power steering pump to timing case | Nm | - | - | |
| BA46.30-P-1012-01C | Banjo bolt, high pressure expansion hose (Active Body Control) to power steering pump | Nm | - | 45 | |
| BA46.30-P-1013-01C | Bolt, belt pulley to ABC pump | Nm | - | - | |
| BA46.30-P-1014-01C | Banjo bolt, high pressure expansion hose (active body control) to ABC pump | Nm | - | - | |
| BA46.30-P-1015-01C | Bolt, high-pressure hose bracket to oil pan | Nm | - | - | |
| BA46.30-P-1016-01C | Banjo bolt, high pressure expansion hose to power steering pump | Nm | 45 | - | |
| BA46.30-P-1017-01C | Union nut, high pressure hose to power steering pump high-pressure line | Nm | 45 | 40 | |
| BA46.30-P-1018-01C | Bolt, power steering pump to rear of timing case cover | Nm | - | - | |
| BA46.30-P-1019-01C | Banjo bolt, pulsation damper and high-pressure line to power steering pump | Nm | - | - | |
| BA46.30-P-1020-01C | Union nut, high-pressure line to power steering pump | Nm | - | - | |
| BA46.30-P-1021-01C | Bolt, power steering pump bracket to crankcase | Nm | - | - | |
| BA46.30-P-1022-01C | Nut, power steering pump to bracket | Nm | - | - | |
| BA46.30-P-1023-01C | Bolt, retaining clamp of high pressure line to bracket or to crankcase | Nm | - | - | |
| BA46.30-P-1024-01C | Bolt, bracket of high pressure line to engine mount | Nm | - | - | |
| BA46.30-P-1025-01C | Bolt, return line bracket to front axle carrier | Nm | - | - | |
| BA46.30-P-1026-01C | Bolt, belt pulley to tandem pump | Nm | - | - | |
| BA46.30-P-1027-01C | Banjo bolt, pulsation damper to power steering pump | Nm | - | - | |
| BA46.30-P-1028-01C | Bolt, high-pressure expansion hose bracket to power steering pump bracket | Nm | - | - | |
| BA46.30-P-1029-01C | Bolt, high pressure line retaining clamp to engine support | Nm | - | - | |
| BA46.30-P-1030-01C | Bolt for power steering pump attachment | Nm | - | - | |
| BA46.30-P-1031-01C | Bolt, ABC pressure line bracket to timing case | Nm | - | - | |
| BA46.30-P-1032-01C | Union nut, high-pressure hose to power steering line | Nm | - | - | |
| BA46.30-P-1033-01C | Nut, power steering pump to crankcase | Nm | - | - | |
| BA46.30-P-1034-01C | Bolt, ABC pressure line to power steering pump | Nm | - | - | |
| BA46.30-P-1035-01C | Bolt, retaining clamp to power steering pump | Nm | - | - | |
| BA46.30-P-1036-01C | Bolt, power steering expansion reservoir to front cover at cylinder head | Nm | - | - | |
| BA46.30-P-1037-01C | Bolt, high-pressure line to frame-type integral support | Nm | - | - | |
| BA46.30-P-1038-01C | Bolt, low-pressure line to cooler | Nm | - | - | |
| BA46.30-P-1039-01C | Bolt, low-pressure line to high-pressure line | Nm | - | - | |
POWER STEERING PUMP
| Number | Designation | MODEL 240 | ||
|---|---|---|---|---|
| BA46.30-P-1001-01C | Bolt on belt pulley | Nm | - | |
| BA46.30-P-1002-01C | Return line to power steering pump | Nm | - | |
| BA46.30-P-1003-01C | High-pressure expansion hose to power steering pump | M14X1.5 | Nm | - |
| M16X1.5 | Nm | 40 | ||
| BA46.30-P-1004-01C | High-pressure hose, tandem pump | Nm | - | |
| BA46.30-P-1005-01C | Screw, power steering pump to cylinder liner collar seat or crankcase | Nm | - | |
| BA46.30-P-1006-01C | High pressure flexible hose to pipe or pipe system (RHD only) | Nm | - | |
| BA46.30-P-1007-01C | Bolt, belt pulley to power steering pump | Nm | 30 | |
| BA46.30-P-1008-01C | Bolt, power steering pump to support | Nm | 20 | |
| BA46.30-P-1009-01C | Bolt, power steering pump to timing case cover | Nm | - | |
| BA46.30-P-1010-01C | Self-tapping bolt, power steering pump to timing case | Thread not pre-tapped | Nm | - |
| Thread pre-tapped | Nm | - | ||
| BA46.30-P-1011-01C | Nut, power steering pump to timing case | Nm | - | |
| BA46.30-P-1012-01C | Banjo bolt, high pressure expansion hose (Active Body Control) to power steering pump | Nm | - | |
| BA46.30-P-1013-01C | Bolt, belt pulley to ABC pump | Nm | - | |
| BA46.30-P-1014-01C | Banjo bolt, high pressure expansion hose (active body control) to ABC pump | Nm | - | |
| BA46.30-P-1015-01C | Bolt, high-pressure hose bracket to oil pan | Nm | 23 | |
| BA46.30-P-1016-01C | Banjo bolt, high pressure expansion hose to power steering pump | Nm | - | |
| BA46.30-P-1017-01C | Union nut, high pressure hose to power steering pump high-pressure line | Nm | - | |
| BA46.30-P-1018-01C | Bolt, power steering pump to rear of timing case cover | Nm | - | |
| BA46.30-P-1019-01C | Banjo bolt, pulsation damper and high-pressure line to power steering pump | Nm | - | |
| BA46.30-P-1020-01C | Union nut, high-pressure line to power steering pump | Nm | - | |
| BA46.30-P-1021-01C | Bolt, power steering pump bracket to crankcase | Nm | - | |
| BA46.30-P-1022-01C | Nut, power steering pump to bracket | Nm | - | |
| BA46.30-P-1023-01C | Bolt, retaining clamp of high pressure line to bracket or to crankcase | Nm | - | |
| BA46.30-P-1024-01C | Bolt, bracket of high pressure line to engine mount | Nm | - | |
| BA46.30-P-1025-01C | Bolt, return line bracket to front axle carrier | Nm | - | |
| BA46.30-P-1026-01C | Bolt, belt pulley to tandem pump | Nm | - | |
| BA46.30-P-1027-01C | Banjo bolt, pulsation damper to power steering pump | Nm | - | |
| BA46.30-P-1028-01C | Bolt, high-pressure expansion hose bracket to power steering pump bracket | Nm | - | |
| BA46.30-P-1029-01C | Bolt, high pressure line retaining clamp to engine support | Nm | - | |
| BA46.30-P-1030-01C | Bolt for power steering pump attachment | Nm | - | |
| BA46.30-P-1031-01C | Bolt, ABC pressure line bracket to timing case | Nm | - | |
| BA46.30-P-1032-01C | Union nut, high-pressure hose to power steering line | Nm | - | |
| BA46.30-P-1033-01C | Nut, power steering pump to crankcase | Nm | - | |
| BA46.30-P-1034-01C | Bolt, ABC pressure line to power steering pump | Nm | - | |
| BA46.30-P-1035-01C | Bolt, retaining clamp to power steering pump | Nm | - | |
| BA46.30-P-1036-01C | Bolt, power steering expansion reservoir to front cover at cylinder head | Nm | - | |
| BA46.30-P-1037-01C | Bolt, high-pressure line to frame-type integral support | Nm | - | |
| BA46.30-P-1038-01C | Bolt, low-pressure line to cooler | Nm | - | |
| BA46.30-P-1039-01C | Bolt, low-pressure line to high-pressure line | Nm | - | |