Notes on installation of stationary heater - AH83.70-P-0008-02N

MODEL 215 Retrofitted stationary heater 

The fuel tank must be drained before retrofitting the stationary heater.

For this reason the customer must be made aware of the fact, that before retrofitting the fuel tank it must be no more than one quarter full. All holes or boreholes are treated with corrosion protection.

When routing the fuel line the fastening holes may only be made using a chisel.

Care must be taken to ensure that all the holes or bores do not damage any lines or cables routed in the interior.

We recommend storing the stationary heater radio remote control transmitter (A8/3) at a constant interior temperature of more than 15 °C.