Remove/install fresh-air intake - AR83.10-P-3220MCU

MODEL 451.3/4 

Fig 1: Identifying Fresh-Air Intake Remove/Install Components (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Fresh-Air Intake Remove/Install Components (2 Of 2)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove windshield washer fluid reservoir		AR82.35-P-6000MCU
2	Release coolant hose (5) from bracket (arrow B) on fresh-air intake (1)
3	Unclip brake fluid reservoir (2) in the area marked (arrow A) using a suitable screwdriver (3) and place to one side
4	Unscrew nuts (4) on fresh-air intake (1)
5	Remove fresh-air intake (1)	Ensure that gasket (6) is properly seated.
6	Install in the reverse order