Separate oil pump chain - AR18.10-P-2140-01OM

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 642

Fig 1: Identifying Case (602 589 00 98 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Thrust Spindle (602 589 05 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Chain Separating Tool (602 589 02 33 00)

Courtesy of MERCEDES-BENZ USA

Fig 4: Identifying Thrust Pins (602 589 05 63 01)

Courtesy of MERCEDES-BENZ USA

Fig 5: Identifying Thrust Spindle (602 589 04 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 6: Identifying Thrust Pins (602 589 04 63 01)

Courtesy of MERCEDES-BENZ USA

Assemble chain separating tool (1) and thrust spindle (2).

Fig 7: Assembling Chain Separating Tool And Thrust Spindle
Courtesy of MERCEDES-BENZ USA
Position the chain separating tool (1) and the pressure screw (2) at the link of the oil pump chain (3) and separate the oil pump chain (3).

Fig 8: Positioning Chain Separating Tool
Courtesy of MERCEDES-BENZ USA