Separate oil pump chain - AR18.10-P-2140-01AMG

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 156.9

Fig 1: Identifying Case (602 589 00 98 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Thrust Spindle (271 589 10 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Chain Separating Tool (602 589 02 33 00)

Courtesy of MERCEDES-BENZ USA

Screw the pressure screw (02) with the pressure pin (02a) into the chain separating tool (03).
Fit chain separating tool (03) onto oil pump chain.
Screw in pressure screw (02).
Screw in the pressure screw until the pressure pin (02a) is lying against the pin (arrow) on the oil pump chain.
Screw in pressure pin (02a) and press out bolt on oil pump chain.

Fig 4: Screwing Pressure Pin
Courtesy of MERCEDES-BENZ USA
Unscrew pressure screw (02) and remove chain separating tool (03).
Remove bolt (1) for oil pump chain from chain separating tool (03).

Fig 5: Removing Oil Pump Chain Bolt From Chain Separating Tool
Courtesy of MERCEDES-BENZ USA