LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Engine Lubrication, Engine Oil Cooling - 212 Chassis - 1 Of 2) >> Testing & Repair >> Remove/install oil temperature regulator - AR18.30-P-3000AMG

Remove/install oil temperature regulator - AR18.30-P-3000AMG

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 156 

Fig 1: Installing Oil Temperature Regulator
G09975229Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
DANGER Risk of injury  caused by fingers being pinched or crushed  when removing, installing or aligning hoods, doors, trunk lids, tailgates or sliding roof. Keep body parts and limbs well clear of moving parts. AS00.00-Z-0011-01A
DANGER Risk of death  caused by vehicle slipping or toppling off of the lifting platform. Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer. AS00.00-Z-0010-01A
1 Remove timing case cover   AR01.40-P-8000AMG
2 Remove bolts (1)    
3 Take off cover (3) IMPORTANT The temperature regulator (2) is installed under pre-tension in the crankcase.  
4 Remove temperature regulator (2). INSTALLATION IMPORTANT Replace sealing ring at cover (3).  
5 Install in the reverse order