Modify fastening of electrical line on compressor - AR32.22-P-2001-04EW
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212
A Version for 212.2
B Version for 212.0/1
The attachment of the electrical line and the position of the electrical connector (4) on compressor (A9/1) for model 212.0/1 and 212.2 are of a different design.
Only the version for model 212.2 (see picture A, refer to Fig 1) is supplied as a replacement part.
No modifications must be carried out when fitting to model 212.2.
When fitting to model 212.0/1 the attachment of the electrical line and the position of the electrical connector (4) must be modified.
- Unclip electrical connector (4) from bracket for compressor (2)
- Unclip clip with cable tie (3) on bracket for compressor (2)
- Fasten clip with cable tie (3) on bracket for compressor (2) (see picture B, refer to Fig 1)
- Fasten electrical connector (4) on bracket for compressor (2) (see picture B, refer to Fig 1)