Installing transport foil - AR97.20-P-4000A

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 129, 163, 168, 170, 202, 203, 204, 208, 209, 210, 211, 212, 215, 220, 230, 240, 414 with CODE (524) Paint protection

	Notes on transportation sheeting	Model 129, 163, 168, 169, 170, 202, 203, 204, 208, 209, 210, 211, 212, 215, 220, 230, 240, 414	AH97.20-P-9409-03A
1	Remove old transport foil	If old transport foil is present. Using heat simplifies removal of transport foil. Do not heat transport foil too much to prevent paint damage
2	Clean vehicle	Dry wet vehicles with chamois.
3	Check paint surface on vehicle	Visible adhesive tape marks from repainting can remain because they are removed before the vehicle is shipped. It is not necessary to take swelling into consideration when repainting. The new transport foil can be installed on these paint surfaces
4	Install new transport foil by hand	Do not mask plastic parts and rubber profiles not with new transport foil