Remove/install air conditioning blower motor - AR83.30-P-5560CW

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 204.0/2/9 up to 31.5.10

MODEL 212 up to 31.5.10

Illustrated on model 204.0

Fig 1: Air Conditioning Blower Motor Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove cover (1) on right below instrument panel		AR68.10-P-1520CW
2	Disconnect electrical connector (2) and unclip associated connector from blower motor (A32m1)
3	Unclip electrical connector on blower motor (A32m1x1) from blower motor (A32m1)
4	Twist blower motor (A32m1) until markings (3) match. This unlocks the bayonet connection.	The rotation arrow between the two markings (3) designates the rotation direction when installing the blower motor (A32m1).
5	Remove blower motor (A32m1) from air conditioning housing (A32) and remove downward from instrument panel.	The narrow space makes it difficult to remove and install the blower motor (A32m1).
6	Install in the reverse order