LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Climate Control - 212 Chassis - 1 Of 2) >> Testing & Repair >> Remove and install electronic blower control unit >> Remove and install electronic blower control unit - AR83.25-P-1220EL

Remove and install electronic blower control unit - AR83.25-P-1220EL

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 204 as of 1.6.10 

MODEL 207 as of 1.6.10 

MODEL 212 as of 1.6.10 

MODEL 218 

Shown on model 218 

Fig 1: Electronic Blower Control Unit Remove/Install Components - Shown On Model 218
G09977780Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
NOTES Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
1 Remove cover below dashboard on right    
Model 204, 207, 212
Model 218
AR68.10-P-1520CW
2 Disconnect electrical connector (2, 6)    
3 Remove bolts (8)    
4 Remove blower regulator (A32n1) downwards out of air conditioner housing (A32) IMPORTANT Replace seal (7), check for correct seating of seal (7).  
5 Install in the reverse order