Attaching Mercedes-Benz quick-clamping devices - AR40.20-P-0230SX

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 117, 156, 166, 172, 176, 190, 197, 204, 205, 207, 212, 216, 217, 218, 221.0/1, 222, 242, 246

Shown on model 221

Fig 1: Attaching Mercedes-Benz Quick-Clamping Devices - Shown On Model 221 (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Fig 2: Attaching Mercedes-Benz Quick-Clamping Devices - Shown On Model 221 (2 Of 2)

Courtesy of MERCEDES-BENZ USA

	Mount/dismantle
1	Attach quick clamping devices (01) to the front and rear wheels and remove clamping lever	The mounting bell is centered on the disk wheel or rear axle shaft flange by locating the check pins in the five mounting holes (arrows) in the rim. Check the quick clamping devices (01), wheel mirrors and measurement pickups at regular intervals in accordance with the manufacturer's instructions.
1		Quick clamping device	Fig 3
2	Attach wheel mirrors or measurement sensors
3	Dismantle in reverse order

Fig 3: Identifying Quick Clamping Device (124 589 01 31 00)

Courtesy of MERCEDES-BENZ USA