LEMON Manuals: Even more car manuals for everyone
Home >> Smart >> 2015 >> Fortwo Electric Drive, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Wheels, Chassis Alignment Check - 212 Chassis - 2 Of 3) >> Testing & Repair >> Adjust rear-axle toe - AR40.20-P-0261EW

Adjust rear-axle toe - AR40.20-P-0261EW

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 212, 218 

Illustration shows model 204.0 without 4MATIC 

Fig 1: Adjusting Rear-Axle Toe
G09976446Courtesy of MERCEDES-BENZ USA
  Adjust     
1 Loosen nut (60b)    
2 Adjust toe with cam bolt (60a) IMPORTANT If the test values are not attained, the tie rod (60) must be replaced.  
MODEL 212 *BE40.20-P-1001-10Y 
MODEL 212 *BE40.20-P-1002-10Y 
Model 218 *BE40.20-P-1001-10R 
Model 218 *BE40.20-P-1002-10R 
3 Tighten nut (60b) TORQUE SPECIFICATION Self-locking nut, tie rod to rear axle carrier *BA35.20-P-1002-04I 
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 218.3 except 4MATIC, except CODE 489 MODEL 218.9 except 4MATIC, except CODE 489
BE40.20-P-1001-10R Total rear axle toe at vehicle level -2.46° ∠° - 0° 27' (±7')
-2.29° ∠° - -
-2.22° ∠° - -
-1.79° ∠° - -
-1.66° ∠° - -
-1.46° ∠° - 0° 26' (±7')
-1.36° ∠° 0° 26' (±7') -
-1.29° ∠° - -
-1.24° ∠° - -
-0, 79 ∠° - -
-0.65° ∠° - -
-0.45° ∠° - 0° 24' (±7')
-0.35° ∠° 0° 24' (±7') -
-0.29° ∠° - -
-0.26° ∠° - -
+0.21° ∠° - -
+0.35° ∠° - -
+0.55° ∠° - -
+0.65° ∠° 0° 23' (±7') -
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 218 except 4MATIC, with CODE 489 MODEL 218 with 4MATIC, with code 489
BE40.20-P-1001-10R Total rear axle toe at vehicle level -2.46° ∠° - -
-2.29° ∠° - -
-2.22° ∠° - -
-1.79° ∠° - -
-1.66° ∠° - -
-1.46° ∠° 0° 26' (±7') 0° 26' (±7')
-1.36° ∠° - -
-1.29° ∠° - -
-1.24° ∠° - -
-0, 79 ∠° - -
-0.65° ∠° - -
-0.45° ∠° 0° 24' (±7') 0° 24' (±7')
-0.35° ∠° - -
-0.29° ∠° - -
-0.26° ∠° - -
+0.21° ∠° - -
+0.35° ∠° - -
+0.55° ∠° 0° 23' (±7') 0° 23' (±7')
+0.65° ∠° - -
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 218.3 AMG up to 11.2011 MODEL 218.3 AMG as of 12.2011 except 4MATIC
BE40.20-P-1001-10R Total rear axle toe at vehicle level -2.46° ∠° - -
-2.29° ∠° - -
-2.22° ∠° 0° 18' (±7') -
-1.79° ∠° - 0° 13' (±7')
-1.66° ∠° - -
-1.46° ∠° - -
-1.36° ∠° - -
-1.29° ∠° - -
-1.24° ∠° 0° 19' (±7') -
-0, 79 ∠° - 0° 14' (±7')
-0.65° ∠° - -
-0.45° ∠° - -
-0.35° ∠° - -
-0.29° ∠° - -
-0.26° ∠° 0° 19' (±7') -
+0.21° ∠° - 0° 15' (±7')
+0.35° ∠° - -
+0.55° ∠° - -
+0.65° ∠° - -
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 218.9 AMG except 4MATIC MODEL 218.3/9 AMG with 4MATIC
BE40.20-P-1001-10R Total rear axle toe at vehicle level -2.46° ∠° - -
-2.29° ∠° 0° 13' (±7') 0° 13' (±7')
-2.22° ∠° - -
-1.79° ∠° - -
-1.66° ∠° - -
-1.46° ∠° - -
-1.36° ∠° - -
-1.29° ∠° 0° 14' (±7') 0° 14' (±7')
-1.24° ∠° - -
-0, 79 ∠° - -
-0.65° ∠° - -
-0.45° ∠° - -
-0.35° ∠° - -
-0.29° ∠° 0° 14' (±7') 0° 14' (±7')
-0.26° ∠° - -
+0.21° ∠° - -
+0.35° ∠° - -
+0.55° ∠° - -
+0.65° ∠° - -
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212.0 with code 485, except 4MATIC Model 212.0 with code 677, except 4MATIC
BE40.20-P-1001-10Y Total toe at vehicle level +3.07° ∠° - -
+2.58° ∠° - -
+1.60° ∠° 0° 21' (±7') -
+0.72° ∠° - -
+0.03° ∠° - -
-0.06° ∠° - 0° 24' (±7')
-0.26° ∠° - -
-0.79° ∠° - -
-1.24° ∠° - -
-1.29° ∠° - -
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212.0 with code 485, with 4MATIC Model 212.0 with code 677, with 4MATIC
BE40.20-P-1001-10Y Total toe at vehicle level +3.07° ∠° - -
+2.58° ∠° - -
+1.60° ∠° 0° 22' (±7') -
+0.72° ∠° - -
+0.03° ∠° - -
-0.06° ∠° - 0° 24' (±7')
-0.26° ∠° - -
-0.79° ∠° - -
-1.24° ∠° - -
-1.29° ∠° - -
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212.002 with code P25 Model 212.0/2 with code 482
BE40.20-P-1001-10Y Total toe at vehicle level +3.07° ∠° - 0° 18' (±7')
+2.58° ∠° - -
+1.60° ∠° - -
+0.72° ∠° 0° 23' (±7') -
+0.03° ∠° - -
-0.06° ∠° - -
-0.26° ∠° - -
-0.79° ∠° - -
-1.24° ∠° - -
-1.29° ∠° - -
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212.0/2 with code 489, except 4MATIC Model 212.1 with code 482
BE40.20-P-1001-10Y Total toe at vehicle level +3.07° ∠° - -
+2.58° ∠° - 0° 19' (±7')
+1.60° ∠° - -
+0.72° ∠° - -
+0.03° ∠° - -
-0.06° ∠° - -
-0.26° ∠° 0° 25' (±7') -
-0.79° ∠° - -
-1.24° ∠° - -
-1.29° ∠° - -
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212.1 with code 485 Model 212.2 with code 485, except 4MATIC
BE40.20-P-1001-10Y Total toe at vehicle level +3.07° ∠° - -
+2.58° ∠° - -
+1.60° ∠° 0° 21' (±7') -
+0.72° ∠° - -
+0.03° ∠° - 0° 24' (±7')
-0.06° ∠° - -
-0.26° ∠° - -
-0.79° ∠° - -
-1.24° ∠° - -
-1.29° ∠° - -
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212.2 with code 677, except 4MATIC Model 212.2 with code 485, with 4MATIC
BE40.20-P-1001-10Y Total toe at vehicle level +3.07° ∠° - -
+2.58° ∠° - -
+1.60° ∠° - -
+0.72° ∠° - -
+0.03° ∠° - -
-0.06° ∠° - -
-0.26° ∠° - 0° 24' (±7')
-0.79° ∠° - -
-1.24° ∠° 0° 26' (±7') -
-1.29° ∠° - -
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212.2 with code 677, with 4MATIC MODEL 212.025/056/072 with CODE Z04
BE40.20-P-1001-10Y Total toe at vehicle level +3.07° ∠° - -
+2.58° ∠° - -
+1.60° ∠° - -
+0.72° ∠° - -
+0.03° ∠° - -
-0.06° ∠° - -
-0.26° ∠° - 0° 25' (±7')
-0.79° ∠° - -
-1.24° ∠° 0° 26' (±7') -
-1.29° ∠° - -
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212 AMG up to 11.2011, except 4MATIC Model 212 AMG as of 12.2011, except 4MATIC
BE40.20-P-1001-10Y Total toe at vehicle level +3.07° ∠° - -
+2.58° ∠° - -
+1.60° ∠° - -
+0.72° ∠° - -
+0.03° ∠° - -
-0.06° ∠° - -
-0.26° ∠° - -
-0.79° ∠° - 0° 14' (±7')
-1.24° ∠° 0° 14' (±7') -
-1.29° ∠° - -
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212 AMG with 4MATIC
BE40.20-P-1001-10Y Total toe at vehicle level +3.07° ∠° -
+2.58° ∠° -
+1.60° ∠° -
+0.72° ∠° -
+0.03° ∠° -
-0.06° ∠° -
-0.26° ∠° -
-0.79° ∠° -
-1.24° ∠° -
-1.29° ∠° 0° 14' (±7')
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 218.3 except 4MATIC, except CODE 489 MODEL 218.9 except 4MATIC, except CODE 489
BE40.20-P-1002-10R Permissible difference in rear axle toe between right and left side of vehicle ∠° ±0° 15' ±0° 15'
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 218 except 4MATIC, with CODE 489 MODEL 218 with 4MATIC, with code 489
BE40.20-P-1002-10R Permissible difference in rear axle toe between right and left side of vehicle ∠° ±0° 15' ±0° 15'
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 218.3 AMG up to 11.2011 MODEL 218.3 AMG as of 12.2011 except 4MATIC
BE40.20-P-1002-10R Permissible difference in rear axle toe between right and left side of vehicle ∠° ±0° 3' ±0° 3'
CHECK VALUES FOR REAR AXLE TOE

Number Designation MODEL 218.9 AMG except 4MATIC MODEL 218.3/9 AMG with 4MATIC
BE40.20-P-1002-10R Permissible difference in rear axle toe between right and left side of vehicle ∠° ±0° 3' ±0° 3'
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212.0 with code 485, except 4MATIC Model 212.0 with code 677, except 4MATIC
BE40.20-P-1002-10Y Permissible difference in rear axle toe between right and left side of vehicle ∠° ±0° 15' ±0° 15'
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212.0 with code 485, with 4MATIC Model 212.0 with code 677, with 4MATIC
BE40.20-P-1002-10Y Permissible difference in rear axle toe between right and left side of vehicle ∠° ±0° 15' ±0° 15'
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212.002 with code P25 Model 212.0/2 with code 482
BE40.20-P-1002-10Y Permissible difference in rear axle toe between right and left side of vehicle ∠° ±0° 15' ±0° 15'
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212.0/2 with code 489, except 4MATIC Model 212.1 with code 482
BE40.20-P-1002-10Y Permissible difference in rear axle toe between right and left side of vehicle ∠° ±0° 15' ±0° 15'
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212.1 with code 485 Model 212.2 with code 485, except 4MATIC
BE40.20-P-1002-10Y Permissible difference in rear axle toe between right and left side of vehicle ∠° ±0° 15' ±0° 15'
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212.2 with code 677, except 4MATIC Model 212.2 with code 485, with 4MATIC
BE40.20-P-1002-10Y Permissible difference in rear axle toe between right and left side of vehicle ∠° ±0° 15' ±0° 15'
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212.2 with code 677, with 4MATIC MODEL 212.025/056/072 with CODE Z04
BE40.20-P-1002-10Y Permissible difference in rear axle toe between right and left side of vehicle ∠° ±0° 15' ±0° 15'
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212 AMG up to 11.2011, except 4MATIC Model 212 AMG as of 12.2011, except 4MATIC
BE40.20-P-1002-10Y Permissible difference in rear axle toe between right and left side of vehicle ∠° ±0° 3' ±0° 3'
CHECK VALUES FOR REAR AXLE TOE

Number Designation Model 212 AMG with 4MATIC
BE40.20-P-1002-10Y Permissible difference in rear axle toe between right and left side of vehicle ∠° ±0° 3'
TIE ROD

Number Designation MODEL 212 MODEL 218
BA35.20-P-1002-04I Self-locking nut, tie rod to rear axle carrier Nm 110 110