Connect STAR DIAGNOSIS and read out fault memory - AD00.00-P-2000-04B

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 190

MODEL 205

MODEL 217

MODEL 222

MODEL 253

Connect diagnostic system (1) to diagnostic connector (X11/4) in the driver footwell.
Start XENTRY.
Select the model series in the menu via the path Selection → Brand → Product group → Vehicle.
The work procedures are menu-assisted.

Stored faults which may be caused by disconnecting cables or by simulation during testing operations must be deleted in the diagnostic trouble code memory following completion of the operations.

Fig 1: Connecting Diagnostic System To Diagnostic Connector (X11/4)
Courtesy of MERCEDES-BENZ USA
Disconnect diagnostic system (1).