Single-belt drive - BE13.22-P-1000-01A
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 606 (except 606.962)
ENGINE 604, 605, 606, 611.960/961/962, 612.961/962/963/965/966/967, 613.960/961, 628.960, 629, 642, 651
SINGLE-BELT DRIVE
| Number | Designation | With refrigerant compressor | Without A/C compressor | ||
|---|---|---|---|---|---|
| BE13.22-P-1001-01A | Belt length | - | mm | 2120 | 2050 |
| Belt pulley dia. | mm | - | - | ||
| BE13.22-P-1002-01A | V-belt tension | Initial tension | N | - | - |
| Retensioning value | N | - | - | ||
| Minimum tension | N | - | - | ||
SINGLE-BELT DRIVE
| Number | Designation | With refrigerant compressor | Without A/C compressor | ||
|---|---|---|---|---|---|
| BE13.22-P-1001-01A | Belt length | - | mm | 2140 | 2080 |
| Belt pulley dia. | mm | - | - | ||
| BE13.22-P-1002-01A | V-belt tension | Initial tension | N | - | - |
| Retensioning value | N | - | - | ||
| Minimum tension | N | - | - | ||
SINGLE-BELT DRIVE
| Number | Designation | With refrigerant compressor | Without A/C compressor | ||
|---|---|---|---|---|---|
| BE13.22-P-1001-01A | Belt length | - | mm | 2140 | 2080 |
| Belt pulley dia. | mm | - | - | ||
| BE13.22-P-1002-01A | V-belt tension | Initial tension | N | - | - |
| Retensioning value | N | - | - | ||
| Minimum tension | N | - | - | ||
SINGLE-BELT DRIVE
| Number | Designation | A/C compressor with VDA tandem pump | With refrigerant compressor | ||
|---|---|---|---|---|---|
| BE13.22-P-1001-01A | Belt length | - | mm | 2241 | 2260 |
| Belt pulley dia. | mm | - | - | ||
| BE13.22-P-1002-01A | V-belt tension | Initial tension | N | - | - |
| Retensioning value | N | - | - | ||
| Minimum tension | N | - | - | ||
SINGLE-BELT DRIVE
| Number | Designation | Without A/C compressor | A/C compressor with VDA tandem pump | ||
|---|---|---|---|---|---|
| BE13.22-P-1001-01A | Belt length | - | mm | 2190 | 2271 |
| Belt pulley dia. | mm | - | - | ||
| BE13.22-P-1002-01A | V-belt tension | Initial tension | N | - | - |
| Retensioning value | N | - | - | ||
| Minimum tension | N | - | - | ||
SINGLE-BELT DRIVE
| Number | Designation | With refrigerant compressor | Without A/C compressor | ||
|---|---|---|---|---|---|
| BE13.22-P-1001-01A | Belt length | - | mm | 2260 | 2190 |
| Belt pulley dia. | mm | - | - | ||
| BE13.22-P-1002-01A | V-belt tension | Initial tension | N | - | - |
| Retensioning value | N | - | - | ||
| Minimum tension | N | - | - | ||
SINGLE-BELT DRIVE
| Number | Designation | A/C compressor with VDA pump | With refrigerant compressor | ||
|---|---|---|---|---|---|
| BE13.22-P-1001-01A | Belt length | - | mm | 2271 | 2250 |
| Belt pulley dia. | mm | - | 110 | ||
| BE13.22-P-1002-01A | V-belt tension | Initial tension | N | - | - |
| Retensioning value | N | - | - | ||
| Minimum tension | N | - | - | ||
SINGLE-BELT DRIVE
| Number | Designation | With refrigerant compressor | Without A/C compressor | ||
|---|---|---|---|---|---|
| BE13.22-P-1001-01A | Belt length | - | mm | 2276 | 2271 |
| Belt pulley dia. | mm | 120 | 109 | ||
| BE13.22-P-1002-01A | V-belt tension | Initial tension | N | - | - |
| Retensioning value | N | - | - | ||
| Minimum tension | N | - | - | ||
SINGLE-BELT DRIVE
| Number | Designation | With 24-V alternator | With refrigerant compressor | ||
|---|---|---|---|---|---|
| BE13.22-P-1001-01A | Belt length | - | mm | - | 2260 |
| Belt pulley dia. | mm | - | - | ||
| BE13.22-P-1002-01A | V-belt tension | Initial tension | N | 450 | - |
| Retensioning value | N | - | - | ||
| Minimum tension | N | 280 | - | ||
SINGLE-BELT DRIVE
| Number | Designation | A/C compressor with VDA tandem pump | A/C compressor with VDA tandem pump | ||
|---|---|---|---|---|---|
| BE13.22-P-1001-01A | Belt length | - | mm | 2315 | 2271 |
| Belt pulley dia. | mm | - | - | ||
| BE13.22-P-1002-01A | V-belt tension | Initial tension | N | - | - |
| Retensioning value | N | - | - | ||
| Minimum tension | N | - | - | ||
SINGLE-BELT DRIVE
| Number | Designation | A/C compressor with VDA pump | A/C compressor with VDA tandem pump | ||
|---|---|---|---|---|---|
| BE13.22-P-1001-01A | Belt length | - | mm | 2276 | 2283 |
| Belt pulley dia. | mm | - | - | ||
| BE13.22-P-1002-01A | V-belt tension | Initial tension | N | - | - |
| Retensioning value | N | - | - | ||
| Minimum tension | N | - | - | ||
SINGLE-BELT DRIVE
| Number | Designation | ENGINE 629 in MODEL 211 | ENGINE 642 | ||
|---|---|---|---|---|---|
| BE13.22-P-1001-01A | Belt length | - | mm | 2265...2275 | 2030...2040 |
| Belt pulley dia. | mm | - | - | ||
| BE13.22-P-1002-01A | V-belt tension | Initial tension | N | - | - |
| Retensioning value | N | - | - | ||
| Minimum tension | N | - | - | ||
SINGLE-BELT DRIVE
| Number | Designation | ENGINE 651 in MODEL 204, 212 | ||
|---|---|---|---|---|
| BE13.22-P-1001-01A | Belt length | - | mm | 2149...2161 |
| Belt pulley dia. | mm | - | ||
| BE13.22-P-1002-01A | V-belt tension | Initial tension | N | - |
| Retensioning value | N | - | ||
| Minimum tension | N | - | ||