Overview of wiring diagrams for electrical system, equipment and instruments - PE54.00-P-1100DAA
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 212
| Wiring diagram control unit DC/AC converter | MODEL 212 with CODE U80 (115 V socket) Control unit N24/3 |
PE54.10-P-2103DAA | |
| MODEL 212 with CODE U67 (230 V socket in the rear) without CODE U80 (115 V socket) Control unit N24/3 |
PE54.10-P-2103DAB | ||
| Wiring diagram for battery management control unit | MODEL 212 up to model year 2015 Control unit N82/2 |
PE54.10-P-2104DAA | |
| MODEL 212 as of model year 2015 Control unit N82/2 |
PE54.10-P-2104DAB | ||
| Wiring diagram for the power electronics control unit | MODEL 212 Control unit N129/1 | PE54.10-P-2106DAA | |
| Wiring diagram for fuse box (F1/1) | MODEL 212 | PE54.15-P-2108DAA | |
| Wiring diagram for HYBRID fuse and relay box | MODEL 212 K40/10 | PE54.15-P-2109DAA | |
| Wiring diagram of front backup fuse box (F32) | MODEL 212 | PE54.15-P-2502DAA | |
| Wiring diagram, rear prefuse box (F33) | MODEL 212.0 | PE54.15-P-2503DAA | |
| Connector separation point wiring diagram | MODEL 212 X8/45, X8/46, X8/47, X138/1, X157/1 | PE54.18-P-2300DAA | |
| MODEL 212 X18, X18/2 | PE54.18-P-2300DAB | ||
| MODEL 212 X26 (except M 157, M 276, M 278) | PE54.18-P-2300DAC | ||
| MODEL 212 X35/1, X35/2, X62/6, X62/7, X62/32, X62/33 | PE54.18-P-2300DAD | ||
| MODEL 212 X35/3, X35/4 | PE54.18-P-2300DAE | ||
| MODEL 212 X26 (M 157, M 276, M 278) | PE54.18-P-2300DAF | ||
| Wiring diagram for electronic ignition switch (EIS) control unit | MODEL 212 Control unit N73 | PE54.21-P-2104DAA | |
| Wiring diagram, special vehicle multifunction control unit (SVMCU (MSS)) | MODEL 212 with CODE 965 (Electrical preinstallation, rental vehicles) Control unit N26/9, (1) |
PE54.21-P-2105DAA | |
| MODEL 212 with CODE 965 (Electrical preinstallation, rental vehicles) Control unit N26/9, (2) |
PE54.21-P-2105DAB | ||
| Wiring diagram of front SAM control unit with fuse and relay module (N10/1) | MODEL 212 (1) | PE54.21-P-2106DAA | |
| MODEL 212 (2) | PE54.21-P-2106DAB | ||
| MODEL 212 (3) | PE54.21-P-2106DAC | ||
| MODEL 212 (4) | PE54.21-P-2106DAD | ||
| MODEL 212 (5) | PE54.21-P-2106DAE | ||
| MODEL 212 (6) | PE54.21-P-2106DAF | ||
| MODEL 212 (7) | PE54.21-P-2106DAG | ||
| MODEL 212 (8) | PE54.21-P-2106DAH | ||
| MODEL 212 (9) | PE54.21-P-2106DAI | ||
| MODEL 212 (10) | PE54.21-P-2106DAJ | ||
| Wiring diagram for overhead control panel (OCP) control unit | MODEL 212 with CODE 414 (Sliding sunroof) Control unit N70 (with CAN) |
PE54.21-P-2107DAA | |
| MODEL 212 Control unit N70/3 (without CAN) | PE54.21-P-2107DAB | ||
| Wiring diagram / rear SAM control unit with fuse and relay module (N10/2) | MODEL 212 (1) | PE54.21-P-2108DAA | |
| MODEL 212 (2) | PE54.21-P-2108DAB | ||
| MODEL 212 (3) | PE54.21-P-2108DAC | ||
| MODEL 212 (4) | PE54.21-P-2108DAD | ||
| MODEL 212 (5) | PE54.21-P-2108DAE | ||
| MODEL 212 (6) | PE54.21-P-2108DAF | ||
| MODEL 212 (7) | PE54.21-P-2108DAG | ||
| MODEL 212 (8) | PE54.21-P-2108DAH | ||
| MODEL 212 (9) | PE54.21-P-2108DAI | ||
| MODEL 212 (10) | PE54.21-P-2108DAJ | ||
| Wiring diagram for upper control panel control unit | MODEL 212 up to 5/31/10 Control unit N72/1 | PE54.21-P-2119DAA | |
| MODEL 212 as of 6/1/10 Control unit N72/1 | PE54.21-P-2119DAB | ||
| Wiring diagram for drive unit control unit | MODEL 212.074/077/274/277 Control unit N145 | PE54.21-P-2128DAA | |
| Wiring diagram for multifunction camera | MODEL 212 with CODE 238 (Active lane keeping Assist) with CODE 476 (Lane keeping assist) with CODE 513 (Speed Limit Assist) with CODE 608 (Adaptive Highbeam Assist) Control unit A40/11, N62/2 |
PE54.21-P-2129DAA | |
| MODEL 212 as of model year 2014 with CODE 238 (Active lane keeping Assist) with CODE 266 (Steer Assist) with CODE 269 (Brake Assist PLUS with Cross-Traffic Assist (BAS+Q) with CODE 271 (Autonomous brake intervention/pedestrian protection) with CODE 513 (Road sign recognition system) with CODE 628 (Adaptive Highbeam Assist Plus) Control unit A40/13 |
PE54.21-P-2129DAB | ||
| Wiring diagram for FlexRay gateway control unit | MODEL 212 with CODE 233 (DISTRONIC PLUS) with CODE 237 (Active Blind Spot Assist) with CODE 238 (Active lane keeping Assist) with CODE 253 (Rear impact warning and protection system) with CODE 266 (Steer Assist) with CODE 268 (Brake Assist System Plus) with CODE 269 (Brake Assist PLUS with Cross-Traffic Assist (BAS+Q) with CODE 271 (Autonomous brake intervention/pedestrian protection) with CODE 300 (Collision mitigation (PRE-SAFE® Brake)) Control unit N93/7 |
PE54.21-P-2143DAA | |
| Wiring diagram for data link connector/diagnostic socket | MODEL 212 Diagnostic connector X11/4 | PE54.22-P-2000DAA | |
| Wiring diagram for instrument cluster (IC) control unit | MODEL 212 Control unit A1 | PE54.30-P-2101DAA | |
| Wiring diagram, Night View Assist control unit | MODEL 212 with CODE 610 (Night view assist) Control unit N101 |
PE54.30-P-2103DAA | |
| Wiring diagram for Parktronic system (PTS) control unit | MODEL 212 with CODE 220 (PARKTRONIC) up to model year 2013 with CODE 230 (Advanced Parking Guidance) up to model year 2013 Control unit N62 |
PE54.65-P-2101DAA | |
| MODEL 212 with CODE 220 (PARKTRONIC) as of model year 2014 with CODE 235 (Active Parking Assist) as of model year 2014 with CODE 501 (360 degree camera) as of model year 2014 Control unit N62 |
PE54.65-P-2101DAB | ||
| Wiring diagram for backup camera control unit | MODEL 212 with CODE 218 (Rear view camera) without CODE 498 (Japanese version) Control unit N66/10 |
PE54.65-P-2102DAA | |
| MODEL 212 with CODE 218 (Rear view camera) with CODE 498 (Japanese version) Control unit N66/2 |
PE54.65-P-2102DAB | ||
| Wiring diagram of reversing camera | MODEL 212 up to 3/1/15 as of model year 2014 with CODE 218 (Rear view camera) B84/3 |
PE54.65-P-2103DAA | |
| MODEL 212 as of 3/2/15 with CODE 218 (Rear view camera) B84/3 |
PE54.65-P-2103DAB | ||
| Blind Spot Assist wiring diagram | MODEL 212 as of 6/1/10 up to model year 2013 with CODE 234 (Blind Spot Monitoring) B29/4, B29/5 |
PE54.71-P-2100DAA | |
| MODEL 212 as of model year 2014 with CODE 234 (Blind Spot Monitoring) B29/5, B29/6 |
PE54.71-P-2100DAB |