Remove/install electrical connector on media interface on glove box - AR68.10-P-1400-02CW

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 164, 207, 212 with CODE (518) Media interface

Work procedure shown on model 212.

Fig 1: Glove Box, Cover And Connector

Courtesy of MERCEDES-BENZ USA

Open lid of glove box (1).
Unclip cover (2) from media interface electrical connector (X18/70) and remove.

Fig 2: Catch Hooks, Glove Compartment And Connector

Courtesy of MERCEDES-BENZ USA

Unlock media interface electrical connector (X18/70) from catch hooks (3) on glove compartment (1) and guide media interface electrical connector (X18/70) out of glove compartment (1) toward rear.
Ensure that catch hooks (3) locks correctly on glove box (1).
Install in the reverse order.